Shop by Vehicle
Reverse Lights
Backup Lights and Reverse Bulbs Built for Your Rig
Most people treat reverse lights as a legally required afterthought, barely bright enough to matter. That is backwards. In practice, a proper backup light upgrade is one of the cheapest, fastest wins you can make, whether you are backing a trailer down a dark ramp or just trying to see the curb in your own driveway, and the right bulb or housing depends entirely on what socket and housing your vehicle actually uses.
What Installing These Has Taught Us
Fitment quirk worth knowing: we've seen generic reverse bulbs sit unlit for months, not because the LED chip failed, but because the bulb body was physically too tall for the factory housing and never fully seated into place. The GTR Ultra Series reverse bulbs we spec, in 1156 and 7440 fitments among others, ship with housing adapters built specifically to solve that clearance problem, so they lock in and light up the first time, not the fourth. Each bulb runs 15x CSP 1919 LEDs at 1,200 raw lumens, 6000K.
See a Reverse Light Upgrade in Action
A factory reverse bulb was only ever designed to warn people behind you, not to actually light up what's back there. That said, if you are already swapping your housing, it's worth pairing a brighter bulb with LED tail lights built with stronger reverse output from the factory, like the Morimoto XB assemblies that run eight dedicated reverse LEDs instead of a single reflector-box filament.
From there, fitment is the whole game. Worth noting: most trucks and SUVs run a 1156, 3156, or 7440 style reverse socket, while a lot of cars use a smaller T15/921 wedge, and the bulb base matters more than the model year badge on your tailgate. And some newer rigs skip tail-mounted reverse entirely, moving the reverse lights down to the bumper so the tails run switchback only. Bottom line, check your factory bulb's base before you order so the pair you pick seats on the first try.
No matter what your vehicle uses, the Morimoto LED700 Backup Light Boost Bar earns a spot on the list. It bolts straight to any standard US or Canadian license plate holes with no drilling, running 45 CREE J Series 2835 LEDs for 2,700 raw lumens through a focused 45-degree lens, so you can run it alongside your socket-specific bulbs for a serious output jump.
23 Results
Baja Designs LED Reverse Light
Baja DesignsWith Baja S2 LED Pods & Wiring
Baja DesignsVehicle-Specific Reflector Replacements
Oracle LightingVehicle-Specific Mounting Solution
Rigid Industries