Easy Install Universal Retrofit Kit

Bi-Xenon: Morimoto Mini H1 Stage III

B-RFK-MH1

PART #: 2 x PR10, 2 x S10, 2 x BL11, 2 x B211, 1 x H10


[ In Stock: pieces ]

FREE SHIPPING
RETURNS
DIRECT
EXPERTISE
ENTHUSIASTS
REPUTATION

Product Details

High Ranking: For years now, Morimoto's Mini H1 Stage III complete universal retrofit bi-xenon projector kit has been our most popular setup on the site. Not only are these Morimoto projectors the easiest to install, but due to the compact size of the Mini H1 projectors, it's the most universal - fitting in most every application. While Morimoto continues to enhance the performance of their Mini H1 with each new generation, it's also now one of the best performing bi-xenon projector kits in the catalog too.

Morimoto Bi-Xenon Projectors: Morimoto's new Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since their launch, the Bi-Xenon Projectors are one of the most advanced headlight projectors in the world today. Revised optics paired with a cast-curved cutoff shield produces one of the widest low beam patterns we've ever seen, and a high beam that will easily go the distance. Kuria Optic clear lenses maximize intensity throughout, and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.

Shrouds: Basically, they're the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it's installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available, we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer and take your pick!

HID Ballasts: Designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!

H1 HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights--and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.

Optional Precision Bulb Holders: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. Well worth the extra few bucks in the grand scheme of things!

Optional Canbus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.

Optional LED Halos: Though LED halos may not be for everybody, if you're looking for the cleanest, most simple, most reliable setup, we highly recommend the Profile Performance Pivot Halos. Not only are they the brightest, most uniformly lit halos currently on the market, but they double as a switchback turn signal with your blinker circuit. The integrated controllers are extremely easy to setup with only three wires (white, amber, and ground) and allow you to run the white mode continuously until interrupted by the signal--at which point they will blink amber. Once the signal stops, the Pivot ring will automatically switch back to its pure white mode.

Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.

Optional Precision Bulb Holders: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. Well worth the extra few bucks in the grand scheme of things!

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us

Product Specs

  • What's Included

  • PROJECTORS: 2x Morimoto Mini H1 7.0

  • SHROUDS: 2x Your Preference

  • HID BALLASTS: 2x Morimoto XB35 AMP

  • H1 HID BULBS: 2x Morimoto XB

  • WIRE HARNESS: 1x Your Preference

  • WARRANTY: 5 Years

  • OPTIONAL PRECISION BULB HOLDERS: Morimoto MotoHo1ders

  • OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber

  • OPTIONAL LED HALOS: 2x Profile Pivot

  • Compatibility

  • APPLICATIONS: Universal / Size Allowing

  • CAPABILITIES: Both Low & High Beam

  • PROJECTOR WIDTH: 104mm

  • PROJECTOR HEIGHT: 77mm

  • PROJECTOR DEPTH: 139mm (includes bulb holder)

  • PROJECTOR LENS: 2.5 Inches (diameter)

  • MOUNTING SHAFT: 20mm diameter (H4/H7 direct fit)

  • MINIMUM HOUSING DEPTH: 115mm

  • WIRE HARNESS: Match your original bulb size

  • SHROUDS: All styles (centric rings included if req'd)

  • LED HALOS: Varies according to shroud style

  • CERTIFICATIONS: Exceeds DOT requirements

  • Tech Specs

  • OPERATING RANGE: -40C to +125C

  • XB BALLAST INPUT: 9-32VDC

  • XB BALLAST OUTPUT: 85VAC 35W

  • XB BALLAST MAX V: 25kV (at start-up)

  • XB35 BALLAST LIFESPAN: 2500 Hours

  • 3000K BULBS: Golden Yellow (~2800 lm)

  • 4500K BULBS: Warm White (~3500 lm)

  • 5500K BULBS: Pure White (~3400 lm)

  • 6500K BULBS: Cool White (~3200 lm)

  • XB55 50w Ballasts: Not Compatible

Product Reviews

4.8 out of 5 stars

39 Reviews   Write a Review

5 out of 5 stars

3.5 years and still going strong

melissa  Reviewed: 2/18/2014 3:46:24 pm

I bought this from Matt in 2010 and have been using this same setup without any issues ever since. I love my 5th gen prelude now that I can see the road at night. Matt was wonderful in explaining what I need to do and a few websites showed me how to open my headlights make modifications and install. If a girl can do this to her car anyone can. I am so pleased to be able to see the road at night. Thank you TRS !!


5 out of 5 stars

5 STAR

Travis  Reviewed: 3/1/2014 12:54:26 am

I purchased this kit with the xb35 6000k bulbs and it is absolutely the best i have ever driven with i went from a cheap $50 kit driving with those and hid fogs to see at night to just these perfect easy to use projectors absolutely amazing for the easy first timer like myself


5 out of 5 stars

Amazing!

Marc-Andre  Reviewed: 9/11/2019 12:30 pm

Really great amazing quality! The kit comes with everything you need and is really easy to install. In the DIY section of their site, you can find almost any tutorial you need to get the job done.

<br>

<br>Great experience overall and also very powerful light! :-D


5 out of 5 stars

Awesome Product

Joel Harder  Reviewed: 3/30/2019 4:19:53 am

This is the second retrofit kit I have purchased from The Retrofit Source, amazing quality, excellent customer service, and very fast shipping. I recommend them to everybody who asks about my head lights. Can't go wrong with their kits.


5 out of 5 stars

Awesome Upgrade!

Fernando Loo  Reviewed: 11/7/2017 9:19:03 pm

First I went from halogen bulbs to a budget pair of MH1's and they were ok. But then I decided it was time to move to the majors with this MH1 stage 3 kit from Morimoto, and I can see it's a huge difference! It really worths every penny. Fully recommended.


5 out of 5 stars

e46 BMW 330

Vincenzo Nastri  Reviewed: 11/16/2016 6:05:36 pm

Very happy with this Mini H1 kit. Very easy to install. The video made by TRS themselves is informative as are the install guides. The customer service was like no other. They were helpful and answered all my questions and also helped explain what I did not understand. The return/exchange process (I ordered the wrong harness) was also very easy to go through. All in all if I had to do another retrofit, this is the place I would go to. Oh, the lights themselves, I got the H1 XB 6500K bulbs... they are night and day compared to my stock halogens. They are bright and incredibly clear (could also be the new lens). Highly recommend this kit for anyone looking to complete a retrofit.


4 out of 5 stars

Awesome upgrade.

evan hale  Reviewed: 12/5/2017 5:11:45 am

Wish I had done sooner. Thanks to TRS for quick shipping and great products!


5 out of 5 stars

Easy retrofit

Samir  Reviewed: 5/8/2016 7:05:16 am

i completed my first retrofit with this kit. Being that it was my first I was a little scared to tackle it, but with a little know how and plenty of research I was able to do it successfully. The cutoff is perfect and the light output is 10x better than stock. I recommend this kit to anyone that is wanting to retrofit their car.


5 out of 5 stars

easy to use with great results

william  Reviewed: 7/17/2015 3:12:49 am

these where easy to use and had great results you will be happy with the cut off i cant say anything bad about these


5 out of 5 stars

Excelente producto...!!!

Carlos Alberto Reyes Rodriguez  Reviewed: 12/28/2017 12:44:13 pm

Estoy muy contento con sus productos todos de una excelente calidad realmente vale mucho la pena la inversión ya que es de gran calidad estoy muy contento con el resultado.

<br>Saludos desde México