Easy Install HID Projectors
Bi-Xenon: ACME Standard (H1)B-PRJ-ACSTH1
[ In Stock: pieces ]
ACME: Picked up the call from consumers who want a product that meets their expectations but aren't ready to break the bank. Their entry-level gear is the new industry standard that delivers real performance at the right price.
Basic: Every other shop selling these has some fancy way of describing the same thing, but take us from us, if it ain't a Morimoto, it is literally just that: the same thing. Whether you're shopping on eBay, or Amazon, if you're looking for a bi-xenon retrofit on a budget: ACME's standard version of the classic "Mini H1 Bi-xenon" projector is a good buy.
Beam Pattern: Producing a classic DOT-stepped cutoff and a decently sharp cutoff, for such an inexpensive projector the light output isn't half bad!
High / Low: Their push/pull bi-xenon mechanism creates both a low and high beam pattern when actuated. Although dated, ACME H1 Bi-xenons use the most modern version of the Push/Pull solenoid system found on earlier Morimoto projectors.
Easy Install: The ACME H1 Bi-xenon uses a 20mm threaded mounting shaft for easy retrofitting with a good quality Hex-shaped lock ring made of AL. Their 2.5" lenses and small body makes them ideal for use in a budget build for a motorcycle or any vehicle with a small headlight housing.
Direct: These projectors are factory-direct and do not receive the same level of QC that we've come to expect from other brands like Morimoto. However, they've got a good track record for little to no problems out of the box, and their pre-installed clear lens should give them a nice sharp and colorful cutoff line and and good output.
H1 Only: The ACME H1 projectors are designed for, you guessed it! H1 HID bulbs. Other bulbs will not seat properly or result in the proper light output, so pick yourself up a set to make sure you've got it all!
Optional Precision Bulb Holders: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. Well worth the extra few bucks in the grand scheme of things!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
PROJECTORS: 2x ACME Standard H1 Bi-xenons
HARDWARE: Basic mounting hardware / H1 bulb clips
OPTIONAL PRECISION BULB HOLDERS: Morimoto MotoHo1ders
WARRANTY: 6 Months
APPLICATIONS: Universal (cars/trucks/motorcycles)
DIRECT FITMENT: H4, H7 Headlights (little/no mods req'd)
MODIFICATION REQUIRED: H1,H11,H13,9005,9006,9007 housings
BULBS: H1 HID Only
SHROUDS: All Styles (w/ Centric Rings)
CENTRIC RINGS: Shrouds Require Mini H1 Model
FUNCTIONALITY: Low and High Beam (Bi-Xenon)
TRAFFIC PATTERN: LHD Only
COMPATIBLE WITH: 35w H1 HID Systems Only
DEPTH: 139mm (includes bulb holder)
LENS DIAMETER: 2.5in
MOUNTING SHAFT: 20mm Diameter
HOUSING DEPTH: 115mm Minimum
Awesome budget projectors.
Corey Reviewed: 7/22/2016 3:43:57 pm
I've bought 2 sets of these for both of my cars. Install was super easy and straight forward. Light output is amazing compared to factory.
Acme Standard Projectors
Ernest Searle-Spratt Reviewed: 6/28/2017 11:09:26 pm
I just installed these on my 2005 Ford Ranger FX/4 and they are incredible. Very will made, excellent cutoff and very nice beam pattern. I have to say, these perform much better then the entry level price of 25 bucks would suggest. For those on a budget or like me and are not willing to pour a ton of money into a 12 year old vehicle, buying these are a no brainer. The mini gatling gun shroud goes awesome with these, no centric ring needed and they look great. I highly recommend these. Good job TRS selling a quality product for a fantastic price in a day and age where over paying for something seems the norm. Kudos all around to a great product and a great company.
Gregory Jones Reviewed: 7/5/2018 10:19:53 pm
Used these in a retrofit for my Tercel about 6 months ago. Excellent light output. I actually prefer these over my older Morimotos in my Yaris.
Jeffrey Reviewed: 6/14/2016 10:56:11 pm
Bought these projectors for a little project I had, was thinking bout ordering morimotos mini h1 after I had gotten everything the way I wanted it, that was until I put everything in place and was surprised with these inexpensive projectors, gets the job done, I would highly recommend these if you're on a budget
Great item for price
Jeffrey Reviewed: 5/31/2016 2:35:26 am
Very good product for the price, good cut-off with rainbow effect. Would recommend if you're looking to do a retrofit project on a budget
Hey that's my car in the picture!
nolan tsuchiya Reviewed: 7/5/2019 9:13:01 pm
Just noticed that you guys used a picture of my old '02 Bugeye wagon in the "in action" pictures! That was my first retrofit and I used the Morimoto Mini H1 4.0 full retrofit kit. I'm not sure if they are the same as Acme standard H1.
Agustin Dominguez Reviewed: 5/29/2018 8:15:58 am
got a set from a friend to retrofit my headlights but when he said he payed 25$ i was like no thanks, how wrong i was when i tried them on,just wowwwww
Incredible Projectors for the price
Ernest Searle-Spratt Reviewed: 7/8/2017 11:01:05 pm
The title says it all. For $25.00 these budget projectors perform extremely well. I am very satisfied with my purchase and the bang for the buck is incredible. Kudos to TRS for offering such a good quality product for a more then fair price.
Perfection For The Price
Chukwudi Ofuani Reviewed: 2/3/2019 3:46:04 am
What can I say? I'm basically speechless. I always wanted to do retrofits but was always scared of cutting my headlights bowls. Saw the pricing on these and couldn't pass up especially being I didn't have to cut my headlights bowl,it's all basically plug and play. Long story short I bought first set for my Tacoma, tested them out out of the box and was wow'd at the output/cutoff to the point that I bought another set 1 day later for my IS300. This is a bang for your buck and it's a no brainier of you pass up. I even recommended it to a friend.