White DRL Bi-LED Headlights
Toyota Tacoma (16+): XB LED HeadlightsB-ASY-LF530-TRS
[ In Stock: 0 pieces ]
No Substitutes: If you're still running oldschool halogen headlights on your "Third Gen" Toyota Tacoma, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best LED headlights on the market today for the Tacoma aftermarket
Second Gen Update: The Tacoma XB headlights broke the mold when they came out as the first set of performance aftermarket headlights for the Tacoma... but some early adopters weren't 100% satisfied with the light output. In true Morimoto fashion, nothing gets left alone for long and that's why now the new Gen 2 version is in distribution!
More Light Output: The original Tacoma XB's used 2 projectors for low beam, and one dedicated high beam. The new setup utilizes all three projectors for the low beam, and has a dual Bi-LED setup. The results? 33% more light output for low beam mode, 100% more output in high beam mode, and a better distribution of light with more foreground (on the ground directly in front of the truck) for improved visibility while cornering. Asked and answered!
Start-Up Sequence: And if the optical upgrades weren't enough, the badass start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off in. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor!
OEM Plus: We live, eat, and sleep headlights. While the Tacoma LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes "you pay for what you get". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed.
Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light.
DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.
Plug-n-Play: Wiring is easy too! The LED headlights are designed to work on your Toyota Tacoma without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.
Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. While that feature will cause others to mistake your truck for an Audi; for those who are a bit more traditional they can also be setup to run as solid on/off style signals too.
Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.
They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets.
HEADLIGHTS: 2x 2016+ Tacoma XB LED
WIRING: Plug and Play
DRIVERS: Flicker / Hyperflash Modules
WARRANTY: 5 Years
TOYOTA: Tacoma (2016+) w/o OEM LED Heads
US TRUCKS: 100% Compatible
CANADIAN TRUCKS: See Below
REPLACES: 8115004270, 8111004270, 8115004280, 8111004280, 8115004250, 8111004250, 8115004260, 8111004260
YOUR HEADLIGHT STALK: MUST HAVE "DRL OFF" CAPABILITY! IF YOU CANNOT DISABLE THE DAYTIME RUNNING LIGHT, IT WILL INTERFERE WITH THE SWITCHBACK TURN SIGNAL.
CERTIFICATIONS: DOT, SAE, FMVSS108 STANDARDS
EXCLUSIONS: Not compatible with OEM LED Headlight trucks!
TRAFFIC PATTERN: LHD ONLY
OPERATING VOLTAGE: 9-32V DC
HOUSING COLOR: Gloss Black
REFLECTOR COLOR: Smoked
RUNNING / PARKING LIGHT COLOR: White (LED)
TURN SIGNAL COLOR: Amber (Sequential LED)
OPTICS: Tri-Kuria Optic LED
HOUSING MATERIAL: Polycarbonate
UV COATING: Momentive UVHC3000
Awesome LED lights
These look and work great. Absolutely love the sequential signal. DRL is nice and bright. While not as bright as HID the beam pattern is excellent and the light is a nice pure white.
Everything I hoped they would be
As soon as I saw Morimoto/TRS announce this product, I knew it was something I had to have.
After waiting very patiently and through many months of setbacks and delays, my lights finally arrived this past week.
Upon initial unboxing, the quality is just as you would expect from such a big time player like Morimoto. High quality composites and only the best build materials were used during their construction.
I spent the next day removing my Morimoto HID kit and LED High Beam bulbs and then worked on installing these new lights. All I can really say is WOW. The sequential turn signals are absolutely flawless and the DRL is a nice crisp white. The projectors have a very nice cutoff and the High beams are similar, if not better than that of my Profile Peak bulbs that I had previously installed.
I love how "OEM" these lights really look and feel and am happy to say that my truck now has zero chrome, sans the lug nuts. Operation blackout - COMPLETE.