DESCRIPTION
FEATURES & BENEFITS
- Powerful LED Illumination: Morimoto XB fog lights offer 2400 lumens of pure white light for superior visibility.
- Simple Installation: Easy plug-and-play setup compatible with multiple Toyota models.
- Precise Aiming: Integrated height adjusters ensure optimal light direction.
- Durable Build: Robust polycarbonate lens and aluminum housing resist wear and tear.
- Compliant and Safe: Meets/exceeds SAE, DOT, and ECE regulations for your peace of mind.
WHAT’S INCLUDED
Fog Lights: 2x (One Pair) Morimoto XB LED Type T Fog Lights
Wiring: Plug and Play Harness
Optional: Yellow Lamin-X Film Kit
WARRANTY INFORMATION
TECHNICAL SPECIFICATIONS
Intensity: 1,200lm (Raw; each)
Input: H11 Male
Material: Powdercoated Aluminum (Housing), UV-Resistant Polycarbonate (Lens)
Light Source: Philips Luxeon T 5500K (Pure White) or Osram 2800K (Amber)
LINE DRAWINGS
COMPATIBILITY
Toyota 4Runner: 2010-2023
Toyota Avalon: 2007-2015
Toyota Camry: 2007-2014
Toyota Corolla: 2009-2016
Toyota Highlander: 2008-2010
Toyota Matrix: 2009-2013
Toyota Prius: 2010-2016
Toyota Prius C: 2012-2016
Toyota RAV4: 2016-2021
Toyota Prius V: 2012-2016
Toyota Rav4: 2006-2012
Toyota Sienna: 2010-2016
Toyota Solara: 2006-2008
Toyota Tacoma: 2012-2023
Toyota Tundra: 2014-2021
Toyota Venza: 2009-2014
Toyota Yaris: 2007-2016
Subaru Legacy: 2015-2017
Replaces Toyota Part #: 81240-06071, 81210-08020
COMPLIANCE
INSTALLATION DOCUMENTS
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Toyota, these complete fog light housings will swap in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Note about Fitment: For most Toyota / Lexus installs, these are a 100% direct fit in place of the stock fog lights. For certain fitments such as the 2014-2018 Toyota 4Runner, the mounting points are very close but not 100% identical to stock, so some min Or trimming or adjustment of the plastic bracket on the Morimoto XB fog lights may be required.
Plug n Play: Wiring is easy too! The Toyota LED fog lights are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these Toyota fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Ratings & Reviews
65 reviews
2016 Tacoma
by Kirk Howard
Tacoma xb lights arrive needing wires installed into plastic clip. Install instructions say plug bare wire pins into the truck light connector to ensure proper polarity before installing into plastic clip. To save you some time, with the plastic clip tab up insert black wire on the left and red on the right (flat sides in like the diagram). The metal pins on the end of the wires fit snug in the plastic clip. I was unable to push them far enough in to work when installed, I had to use needle nose pliers to pull them through the clip far enough to work. After the wire troubleshooting install was a breeze. The lights look awesome.
Aesthetically Pleasing.
by Michael-Glenn Osalbo
Looks way better than stock. It IS bright when and I know it will lost long. It was an easy install on my 15' Legacy. I applied the yellow ppf film for protection. The heat gun helped with forming and applying the film. I will say the light out put is better tahn stock one bulb. However, when i had upgraded to LED bulb intomy stock fog housing, it was brighter than the xb led fog light. No matter, Moriomoto produces winning products. I am definitely a satsified customer . appreciate y'all TRS!
Awesome Fogs!
by James Morel Jr
I have a set of these for my 2016 4runner, I would never go back to stock these are true fog lights with a nice low beam pattern as opposed to the factory lights which have a pattern more like driving lights. I only wish they came in amber because i don't really care for the lamin-x. Lets see these with yellow leds!!!
Awesome Fogs!
by DUSTIN CURRENT
These foglamps are extremely well built and have excellent performance. Best part, they take 15 minutes to install if you know what you're doing!
Awesome lights
by Jackie
These shipped ridiculously fast, and installed quick and easy. The light output is noticeably brighter than the oem halogen lights and the spread is awesome! Nowhere near the amount of glare as the oem lights, and much crisper. Definitely glad I bought these.
Beats Stock Fog Lights By a Long Shot
by Anthony
Just installed these lights in a 2013 Toyota Yaris SE. By now you must already be thinking, "Who mods a Yaris?" Well, I do. Just simple, useful mods like changing out my incandescent bulbs for LEDs.
One of the main problems with the stock Toyota fogs (at least on my car) is they give off way too much glare. I could see street signs above my car being lit up whenever my fogs were on. Well, these LED fogs from Morimoto solve that problem. And they're much brighter than stock! Definitely an upgrade to my car that I won't regret.
Beautiful lights
by John Rainier
Ridiculously better than stock and the color is beautiful.
Install was about 30 minutes, but if you have small hands it will be 10. I couldn't go under my Tacoma to install them, so I had to go through the engine. If you have large hands, it's a pretty tight squeeze. If you have medium to small hands, you won't struggle at all.
Would definitely recommend!
Best I could find :)
by Christopher
I give these 5 stars with a few minor criticisms. 1. Wire gauge should be a minimum 18ga rather than the 24ga just for durability of the connection. 2. The plastic mounting bolt hole tabs could stand to be a thicker heavier material. 3. It would be nice if these lights came with hard yellow covers. The yellow Laminix is hard to apply with reliable results since the lens is so sharply curved and is not as pure yellow as say what you would see on a rally car type fog light.
Better than even OEM LED for color and clarity
by Nathan
Bought as a replacement for a cracked halogen so it was time for an upgrade. Wife's 2009 Venza has the stock D2S / 4300K setup. I have to say these match perfectly! For those of you (like me) who are very particular about color and clarity let me just say these EXCEED what I have seen from even OEM manufactured housings - BMW, Mustang Fogs, and even Lexus. They give that perfect clean white output with no goofy hot spots and the housins look amazing! Even though the lens has a black inlay they still look great with the Venza brushed aluminum bezel. Will be getting another set for my 2013 Sienna SE soon!
Better than OEM
by George
Great product, quick shipping and easy install. I didn't have factory wiring, but the job was still relatively easy. The new fogs look great and put out a well aimed white light. My install pics are located here:
http://www.tacomaworld.com/forum/lighting/345241-trs-morimoto-led-fogs-job-done.html