Vehicle-Specific LED Projector Fog Lights
Toyota (Oval): Morimoto XB LEDB-FOG-TOY-TRS
[ In Stock: 0 pieces ]
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Toyota, these complete fog light housings will swap in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Note about Fitment: For most Toyota / Lexus installs, these are a 100% direct fit in place of the stock fog lights. For certain fitments such as the 2014-2018 Toyota 4Runner, the mounting points are very close but not 100% identical to stock, so some min Or trimming or adjustment of the plastic bracket on the Morimoto XB fog lights may be required.
Plug n Play: Wiring is easy too! The Toyota LED fog lights are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these Toyota fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
Fog Lights: 2x (One Pair) Morimoto XB LED Type T Fog Lights
Wiring: Plug and Play Harness
Optional: Yellow Lamin-X Film Kit
Warranty:10 Years (Click for Details)
Toyota 4Runner: 2010-2021
Toyota Avalon: 2007-2015
Toyota Camry: 2007-2014
Toyota Corolla: 2009-2016
Toyota Highlander: 2008-2010
Toyota Matrix: 2009-2013
Toyota Prius: 2010-2016
Toyota Prius C: 2012-2016
Toyota Prius V: 2012-2016
Toyota Rav4: 2006-2012
Toyota Sienna: 2010-2016
Toyota Solara: 2006-2008
Toyota Tacoma: 2012-2021 (w/o OEM LED Fogs)
Toyota Tundra: 2014-2021 (w/o OEM LED Fogs)
Toyota Venza: 2009-2014
Toyota Yaris: 2007-2016
Subaru Legacy: 2015-2017
Replaces Toyota Part #: 81220-06071, 81210-08020
Compliance: DOT, ECE, SAE Standards
Intensity: 1,200lm (raw; each)
Input: H11 Male
Material: Powdercoated Aluminum (Housing), UV-Resistant Polycarbonate (Lens)
Optic: Kuria Fog-Projection Lens
Light Source: Philips Luxeon T 5500K (Pure White) or Osram 2800K (Amber)
I'm impressed by this LED light system. Very BRIGHT!!! The installation was very easy, as well as the adjustment. The only issue was with the LaminX film installation. After a try or two, the hair dryer allowed the film to stretch and shrink to fit the lens. Next time I will just get the kit with the amber lights.
Our family got these as a Christmas gift upgrade for my Dad's 2014 stock Tundra headlights along with corresponding Morimoto fog lights! All I can say is wow, what a difference. Completely blacks out the front end with the exception of the chrome making for a very high-end look. The DRLs make it look like a brand new truck and gets several comments for people. The night time light output is so much better than stock with an excellent cutoff and brights. Pics don't even do it justice. An expensive upgrade but well worth it, especially as my Dad really wanted brighter light at night for driving. Highly recommend!
07 Camry - Type T XB led fogs
These installed very easily and are convenient to aim as well. They are truly plug and play and coincide well with a traditional headlight retro (have the retro-quick system already).
Will be putting a pair of these on my Tacoma when I get the chance!
07 Camry SE: XB LED fogs
This was the easiest install i have done on my Camry. It took about 25 minutes for both sides, no modification needed. These fog lights are such an improvement from the stock ones, they have a wider beam and a defined cutoff. Plus, they are super easy to aim. I regret not buying these sooner so i wouldn't have wasted so much money on cheap HID's for my stock fogs.
2014 Toyota highlander
It fits my car perfectly even though my car is not on the compability list. I am waiting for Black Friday to buy another set for my 2017 RAV4.
Great output, light temp matches the Corolla's LED headlights very well. The housing also seems to look nicer than the stock reflectors. Way more light output than the stock halogen fogs by a long shot.
The only issue I found was that the lens doesn't stick out quite as far as the stock ones, and there is a small gap around the light. After having them on for almost a year, it looks normal to me, and I don't see it as much of an issue anymore.
2016 Rav4 SE
Luis Gamarra Mendoza
I was skeptical to buy these for my 2016 Rav4 SE since the vehicle was not on the compatible list. I am happy to report that these fit. The original housing was held with two screws. The Morimoto XB LED fit but I could only use one screw to tighten them down. Even with one screw the housing is held on secure. These match perfectly with the stock LED headlights.
2018 4runner. Modifications needed to install.
As stated above, these do not fit 2018 4runners that well. Honestly, would have gone with RIGIDs option had I known this much outside work needed to be done. I needed to file down two mounting tabs and essentially force the bracket into place since the screw spread is slightly wider. The correct part was sent, but the mount is wider than my stock set up. A coworker has a 2014 and she had no issues at all. Guess they changed the fog light mount slightly.
Now for the good. The light pattern is very nice, and the blackout look is very attractive. Matches 4500k HIDs pretty well.
Tacoma xb lights arrive needing wires installed into plastic clip. Install instructions say plug bare wire pins into the truck light connector to ensure proper polarity before installing into plastic clip. To save you some time, with the plastic clip tab up insert black wire on the left and red on the right (flat sides in like the diagram). The metal pins on the end of the wires fit snug in the plastic clip. I was unable to push them far enough in to work when installed, I had to use needle nose pliers to pull them through the clip far enough to work. After the wire troubleshooting install was a breeze. The lights look awesome.
Looks way better than stock. It IS bright when and I know it will lost long. It was an easy install on my 15' Legacy. I applied the yellow ppf film for protection. The heat gun helped with forming and applying the film. I will say the light out put is better tahn stock one bulb. However, when i had upgraded to LED bulb intomy stock fog housing, it was brighter than the xb led fog light. No matter, Moriomoto produces winning products. I am definitely a satsified customer . appreciate y'all TRS!