T10/194: Morimoto XB LED 2.0B-LED-MT10-TRS
[ In Stock: pieces ]
Starting at $X.XX/month with
Morimoto: Has always been our go-to-guys when it came to HID, and when they released their line of LED products, we had our doubts. Performance left a little to be desired compared to some of the more refined models on the market. BUT (and thats a big BUT) that has since changed with the much more mature, refined second generations of each model they offer. While in all-honesty Morimoto didn't exactly nail it the first time around on the LED bulbs, what we have from them today is about as modern as it gets and much more in-line with the quality and performance we've all come to expect from the brand.
So What's new with Version Two? Basically everything except the name, really. Now using their "Hybrid LED" system that was made famous by the XSB 2.0 halos and strips, the new XB T10's are A) super reliable (we've yet to see one fail), B) have an excellent 5500K white or Golden Amber color, and C) much better consistency due to the updated phosphor coating they're putting on them now. We dig it!
Featured: In the October 2015 issue of DSport Magazine alongside LED offerings from Philips and Osram. Morimoto is the benchmark in aftermarket automotive lighting!
Modern Touch:The XB LED bulbs produce plenty of light to improve illumination while adding a modern touch to your vehicle's lighting. They illuminate perfectly evenly, not spotty like the surface mounted chips found on other bulbs. Just don't stare if you care to see anything after that!
Construction: The bulb is constructed with a white fiberglass PCB sandwiched between two very unique white-faced Hybrid LED panels. The positive/ground contacts are perforated and dipped in gold copper to improve contact across both sides of the base.
Everywhere: From interior lighting to city and marker lights, the T10/194 fitment is easily one of the most common sizes used in the automotive industry. Chances are, there's a place for these bulbs on your car, especially now that they're available in both white and amber!
Can-bus: The XB LED bulbs are can-bus friendly and should not hyper flash or cause any "lamp out" errors in MOST applications. If however your vehicle requires more resistance, we recommend using the Morimoto HD Load Resistors
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
BULBS: 2x T10/194 Morimoto XB 2.0 LED
WARRANTY: 2 Years
CROSS COMPATIBLE SIZES: 194, T10, 147,152, 158, 159, 161, 168, 184, 192, 193, 259, 280, 285, 447, 464, 501, 555, 558, 585, 655, 657, 1250, 1251,1252, 2450, 2652, 2827, 2921, 2825, W5W
RATED COLOR: 5500K (white)
RATED LUMENS: 200 lm (raw; per bulb)
POWER DRAW: 165mA
INPUT VOLTAGE: 12V
LIGHT SOURCES: XB Hybrid SMD (2 Panels, 18 total diodes)
prefect tag lights
troy Reviewed: 5/25/2015 4:22:50 am
I put these in my 15optima for tag lights these things are bright af. I'm very happy I will b ordering from u guys again
So close to perfect.
Daniel Mullenix II Reviewed: 6/21/2017 6:45:01 pm
I ordered this bulb to put into the nose light of my motorcycle so it would match the headlights and the new switchbacks. Once installed it was very bright and the color was perfect as expected. However, When I was taking the bulb from the package, the coating that is over the LED was somewhat melted to the back of the packaging and came off when I removed the bulb for install. I'm guessing it's from the heat of being in the truck during shipment. This is one thing that needs to be addressed in design. Other than that the bulb was perfect. I can still use it since it is in a sealed factory housing so I'm not too worried about it. And since I only need one at a time, I have a spare if anything happens. Now if they both fail within a short time, I'll be looking into a warranty exchange. lol
They are alright
Daniel Reviewed: 3/27/2016 8:03:18 pm
Bought these to replace my licence plate blubs but they were more on the warmer side so I used them in my trunk. They do seem brighter than the slyvania zevo bulbs. These would have matched my 4300k hids I used to have on my 2014 when I had it. The Morimoto XB festoon bulbs were perfect fit my wrx.
T10 XB LED's are fantastic
Tim Reviewed: 7/10/2015 2:24:30 am
This is my 3rd purchasing experience with TRS, the first being nearly 4 years ago for globes and ballasts for a retro (which is still going strong, 1000+hours later).
<br>The T10 XB LED's are not too long, they fit the socket tight (but not overly), they look sturdy, they colour match (without any blue tinge, thankfully) and they're bright.
<br>I could leave it there, but...
<br>I found the performance was actually more than I required during on-axis testing over the license plate.
<br>Lucky for me, when the socket is fully engaged, the primary output is in the horizontal plane, and not the vertical - this off-axis orientation to the license plate dimmed the output just enough to my liking.
<br>Don't get me wrong, it's still stupid bright, and others may prefer it that way, but this was just right in my opinion.
<br>In fact, I'm about to buy another pair for another car...
<br>Regarding shipping (to Australia):
<br>a) It was cheap (insignificant)
<br>b) It arrived in just under two weeks.
Very very bright
clemente Reviewed: 11/16/2015 9:06:47 pm
Swapped out my old Leds for these on my side markers on a H3 hummer and wow they are bright the quality is impressive very clean output even during the day.
they are bright
Romeo Reviewed: 12/23/2015 9:52:10 pm
So I put these on my 2008 TL. They are really bright but the color isn't there. It's a plan bright white with a hint of green. For the price and the power of such a small led it's amazing. Just wish it had a more luxury purple hue to it.
derek Reviewed: 6/25/2015 8:38:07 pm
I fabricate alot with LED's so its really hard for me to buy a pre-built builb. To save some time I tried the xb T10's for the map and foot well lighting in my Camaro. Was blown away by the light output, construction and packaging. Nothing else that I've seen is even in the ballpark compared to this bulb. You guys as a company are just on point.
WOW LED T10/194
Tai Reviewed: 1/18/2015 4:27:50 pm
Installed these LED in my 2003 Evo8 dome light. The light output results exceeded my expectation. Very white light output. Would highly recommend to others.
XB LED T/10/194
Standford Reviewed: 3/17/2015 7:13:21 am
Just had these install in my 05 Subaru WRX STI license plate. Perfect fitment! took me 10 mins installation. These bulbs are the brightest bulbs I tried in the market. No blink or any other issues. love these bulb and will definitely order more to match the whole setup~
<br>By the way I switch from VLEDS to XB LED