Rear Headlight Seals
Rubber Housing CapsB-ACC-CAPS-TRS
[ In Stock: 0 pieces ]
Starting at $X.XX/month with
Seal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be your perfect solution to close that back up for good.
Sizing: These rubber housing caps are available in a variety of diameters and shapes to fit the most common headlight flanges.
To Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them.
Durable: These headlight accessories are made of durable black rubber, they won't harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing.
What else? Well...that's about it. They're rubber, they're housing caps, they keep crud out of your custom headlights. If you have a gap, you probably should order our rubber housing caps. That's all!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products and headlight accessories at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
HOUSING CAPS: 2x Molded Rubber (size / style varies)
WARRANTY: 1 Year
RETROFITS: Added depth inside sealed housings
FIT FLANGES: +/-3mm Listed Size
MATERIAL: Automotive Grade Accessory Rubber
COLOR: Black Silicone
DEPTH: Style dependent
SIZE: Varies by selection
Nice tight fit
Nice tight fit on my 2006 F-350 headlight build.
These fit perfect on the rear of my Nissan Titan headlights seal is good and have stayed on and kept my headlights dry for over a year!
This was the perfect addition to install projectors on my 2006 Yamaha FZ1 since the projectors stick out the back of the light. Water tight now.
I had to get these to finish up the retrofit on my 2005 C230. I purchased the 90mm and fit over nice and tight. I secured them with a large zip tie and they've held strong since.