Forget: about 5-pin relays and complicated custom wiring! Morimoto makes it easy with the new XChange LED drivers that allow users to easily achieve "daytime running light" or "switchback" functionality for any accessories operating on 12V.
Daytime Running Lights: Simply connect the [9006 female] DRL-output to your Angel Eyes, LED DRLs, (or whatever else you want). Then feed a constant 12V into the white/black wires and tap into your low beam circuit with the yellow input wire. When the car turns on, so will your DRL's. When you turn the headlights on, the DRL's will automatically shut off.
Switchback Function: Connect the white/black output to your white angel eyes. Connect the yellow/black output to your amber angel eyes. Connect the white/black input a 12V constant, and the yellow/black input to your blinker circuit. With the car running, the white angel eyes will be on. When the blinker starts, the white angel eyes turn off and the amber will start blinking. When the blinker stops, the white angel eyes will automatically turn back on.
Universal: Despite the examples above, this Morimoto switchback module has a wide variety of uses, from angel eyes, to LED strips, to daytime running lights, to fog lights. Anything that runs on a 12V input can conceivably be used with the XChange LED drivers.
Quality: Housed inside of an attractive black extruded aluminum housing; the circuit board is covered in conformal coating to protect from moisture damage. Each output is setup with a sealed 9006 Female connector to keep the connections from corroding.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
MODULES: 2x Morimoto XChange Drivers
INPUT TAPS: 6x Blue T-Taps
WARRANTY: 2 Years
SWAG: Morimoto Decal
HID SYSTEMS: With Relay Harness
RUNNING LIGHTS: 12V LED
LED HALOS: All Brands
LED STRIPS: All Brands
INPUT TRIGGER #1: T-Tap
INPUT TRIGGER #2: T-Tap
OUTPUT #1: 9006 Female
OUTPUT #2: 9006 Female
The wires come with premium crimped disconnect tap connectors I didn't see any T tap connectors in the package for you to tap you vehicles wire. Just the crimped disconnect connectors.
I wanted to save time and clutter when doing a retrofit. I had previously used a relay harness and had to customize it for the different power out pins attaching 9006 connectors and soldering. I am doing a new retrofit and didnt want to deal with all the excess wiring/soldering/ordering parts. Founds these while looking through the retrofit source and opened a live chat to ask a few questions. Essentially these replaced the need of customizing my own 5-pin relay harness and it is all clean and neat. They do exactly what I need which is switching power from my morimoto halo to the bi-led projector. Cant be happier with these!
Nothing more can be said, these do exactly what they say they will. My DRLs turn right off when the low beam kicks on, saving the LEDs from the heat. Thanks TRS!