Vehicle-Specific LED Projector Fog Lights

Mazda: Morimoto XB LED


PART #: 1 x LF200

Save 15% while supplies last on these lights with promo code! (Click Here For Details)

[ In Stock: 0 pieces ]


Product Details

No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, and best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.

Compatible: With many modern applications from Mazda, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.

Plug n Play: Wiring is easy too! The XB LED Fog Lights are designed to work without any special wiring. They will plug into the factory connectors for the stock Mazda fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as your Mazda's fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock Mazda fog lamps. The XB LED Fog Lights meet & exceed all SAE, DOT, and ECE regulations.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a joke!

Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!

Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us

Product Specs

  • What's Included

  • Fog Lights: 2x (One Pair) Morimoto XB LED Type Z Fog Lights

  • Wiring: Plug and Play Harness

  • Optional: Yellow Lamin-X Film Kit

  • Warranty:10 Years (Click for Details)

  • Compatibility

  • Mazda RX-8: 2004-2008

  • Mazda MX-5: 2006-2015

  • Mazda MPV: 2004-2006

  • Mazda CX-9: 2013

  • Mazda CX-7: 2007-2009

  • Mazda CX-5: 2013-2015

  • Mazda MAZDASPEED6: 2006-2007

  • Mazda 6: 2006-2008, 2011-2018

  • Mazda 5: 2006-2010

  • Mazda 3: 2004-2015 (w/ round fogs)

  • Mazda 2: 2010-2015

  • Replaces Mazda Part #: MA2593108, MA2592108

  • Compliance: DOT, ECE, SAE Standards

  • Tech Specs

  • Intensity: 1,200lm (raw; each)

  • Input: H11 Male

  • Material: Powdercoated Aluminum (Housing), UV-Resistant Polycarbonate (Lens)

  • Optic: Kuria Fog-Projection Lens

  • Light Source: Philips Luxeon T 5500K (Pure White)

  • Compliance: IP67

Product Reviews

5 out of 5 stars

11 Reviews   Write a Review

5 out of 5 stars

2006 Mazda 3 Hatchback

Mario Rios Jr

Love these fog lights! Great light output and very simple to install. Better than any replacement bulbs out there. Color match perfect with the 35w Morimoto 5500k kit.

5 out of 5 stars

2015 Mazda 3 Install


Ordered these to pair with the Morimoto HD Elite H11 low beams. These are truly a pretty plug and play operation as the Mazda fog light covers pop out with a flat head screw driver. 3 phillips screws and you're pretty much done.

Before, you couldn't tell if the fog lights were on our not. I did adjust the new ones to point slightly higher than previous (and I probably went to far and need to back off a little) but with the halogen bulbs still installed, the LED fog lights were brighter than the low beams.

I just installed the 5500k HID bulbs today and in my garage these look a little softer white than the pure white of the 5500k HID bulbs. I'll have to look closely at night.

Overall 5 stars all the way. Would recommend to any Mazda owner.

5 out of 5 stars

Amazing light!

Kevin epp

I just installed these fog lights on my 10 Mazdaspeed 3 and wow!

The install was super easy and the fitment was OEM perfect. Light output is excellent. I had some questions in regards to the order and the retrofit source was on the ball with all the emails sent back and forth. I highly recommend this company and their products!

5 out of 5 stars

Another happy customer

Jemmy Peng

Easy to install and it complemented my OEM HID w/ 5500K Morimoto XB Xengreen (2014 Mazda 3) well. Very happy with this purchase.

5 out of 5 stars

Excellent Product!!!


Finally, a fog light for my Miata that actually performs like a fog light! Thanks TRS for offering this awesome Morimoto product.

5 out of 5 stars

Great upgrade!!!


I've had these installed on my 2014 mazda 3 for a few weeks now and they are great. Very easy to install. I have the CBI D4S low beams and they match perfectly when looking straight on at the car. However, when shine against the wall, the LED fogs are whiter in color but that's probably because the low beams are more intense. Still, these are great and I can now tell if the fogs are on or not. With the stock fogs, you can't really tell much difference with them on or off. Overall it's a great upgrade over the stock fogs and you will see the difference at night.

5 out of 5 stars

Fits '14 Mazda 3


Fits perfectly on my '14 Mazda 3 (looks so sexy I might add). Installation was fairly easy. The only problem I had was that one of the screws that holds the oem fog housing in place was already rusted. I had to use pliers to get it out and eventually had to buy new 4mm screws from Home Depot, no big deal.

Unlike the OEM fogs, you can definitely tell the difference when you have these on and they're so much brighter! The color matches better with the low-beam stock HID too, which is what I'm going for. They're not exactly the same though as stock HID tends to be a little more yellow compared the the XBs. But hey, it's still a lot better compared to the dull yellow stock fogs.

5 out of 5 stars

Pure, white light


Highly recommended lights!

I bought these for my 2014 Mazda6 GT. Install was mostly a breeze-- driver's side was perfect. You don't have to remove the bumper, but make sure you at least peel part of it away from the passenger-side fender for room to install the passenger-side light.

Fitment was perfect, and wiring was a breeze. The lights themselves are WORLDS away from the stock halogens; the LEDs are brighter and more intense. The pure white LEDs put the stock 4300k bi-xenons to shame, too-- there's so much of a difference in color that I also bought 5500K D4S bulbs to match.

If you are on the fence about buying these, do it. You won't regret it when you see how nice the fogs look. :)

5 out of 5 stars

The Best!

Ahmed Abdulwahab

Finally I received my pair, and by far it's better than traditional LED bulbs, the color is nice and looks like OEM

5 out of 5 stars



At first I was hesitant to buy these because, frankly, they aren't cheap. I decided to pull the trigger because I wanted something functional and better looking than the oem fog lights on the mazdaspeed 6. I was first blown away by the quality of the materials used to make the fog lights and lens looks sick. I opted to include the yellow lamin-x film and I cannot be happier with the results. It is everything I expected from these foglight and money well spent. Lights are very pretty during the day and lights up the road at night. The yellow film gives the foglgihts an ion yellow or pearl yellow color that looks really cool during the day. Install was pretty straight forward, but anyone with an 03-08 mazda 6/mazdaspeed 6 knows that it is a pain in the ass to have to remove the bumper just to get to the fog lights.