Protection: Is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. After many years sealing headlights with spools of butyl meant for windshields and sunroofs; we've finally got a product that puts OEM-style sealant designed specifically for use in headlights, and indeed it works well!
Purpose: Until now, the only other butyl-ropes on the market were meant for "universal" applications, and true headlight butyl only came in blocks that were nearly impossible to apply without industrial machinery. Morimoto's Retro-Rubber is designed specifically for resealing headlights, not windshields, sunroofs, etc.
Consistency: At room temperature, the RetroRubber has a much harder consistency compared to OCI Butyl glue. Given the "fingernail test" it will harden up just like any OEM Butyl Rubber glue once cooled.
Color: Not all headlights are created equally! Whether your housing was originally sealed with black or gray glue, the RetroRubber has you covered with options. Available in....you guessed it, black or gray... you won't have to settle for a mis-match.
Quantity: Each roll comes with approximately 4M of glue, which is easily enough to re-seal two or more large headlights. Simply stretch it out until it's the perfect thickness to fit inside the headlight channel, cut it to length, rough-fit the lens back onto the housing, heat for at 265F for seven minutes, and compress the housing back together. Done!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
BUTYL GLUE: 1x Roll Morimoto RetroRubber
SATISFACTION: From a moisture-free headlight
SWAG: Morimoto Decal
USES: Re-sealing headlights / tail lights
NOTICE: Not a substitute for epoxy, screws, or clips!
MATERIAL: Automotive Grade Butyl Rubber
ORIGIN: Yokohama, Japan
COLORS: Gray or Black
THICKNESS: 7.5mm (stretch to thin)
LENGTH: Approx 4 Meters
This stuff is amazing! Very easy to work with...looks and seals just like oem, if not better!! Looks like a professional job. At first I was concerned about having enough to seal both lights but I had plenty and probably enough left over to do one more light. I am so thankful that someone recommended this stuff to me. It's made me a regular customer for other things as well.
the stuff matched the factory sealant to a tee and seals out water like no other. Just make sure u get all the old sealant or as much as u can off the old housing don't over do it! or you will have dripping sealant on your beautiful new projectors and inside housing and having to take them all apart again, clean up the mess and resealing them..(hoping that this time they seal out the water and NOT drip on the inside again)
The retrorubber butyl glue is a must with any retrofit project. It works perfect. I have sealed up two sets of headlights so far and still have enough to seal up maybe one more light. Both sets of headlights have had zero moisture issues!
Forget the window weld! This stuff works perfect per TRS recommendations.
Have heard stories about moisture problems after people finish up a retro. Being my first project I didn't want to have the hassle of fogged lights. Nor the mess of standard butyl. This stuff was great to work with. About 6 weeks later after heavy rains and lovely St. Louis humidity my lights are clear as can be.
To me this is the best way to reseal your lights. This is a much better option than using any glue out of a tube. It is more controllable and can be cut to the perfect length needed. No waste! Seals perfect once headed, and there's plenty of it to do more than a set of lights in one roll. I will be buying it again for my next project.
Went from using 3M window weld to TRS Butyl and the difference in night and day. Easier to work with, not as tacky at room temp, little stiffer than the 3M but makes a MUCH better seal on the headlight. Cannot pull the lens off the housing after it cools like with the 3M.