Application-Specific Retrofit Kit
Retro-Quik: Subaru Legacy (05-14)B-RFK-RQLEG
[ In Stock: pieces ]
Starting at $X.XX/month with
Lucky You: Your symmetrical AWD can take you anywhere, but can you see anything with those stock headlights? Luckily for you, the Morimoto Retro-Quik system is designed as a direct bolt-on upgrade for a big performance boost inside the headlights on all 05-14 Subaru Legacys / Outbacks.
Bi-Xenon Projectors: Morimoto's most modern bi-xenon, the Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since way back when the 1.0 came out, it's now one of the most advanced headlight projectors in the world today. Revised reflector optics paired with their curved cutoff shield produces one of the widest low beam patterns we've ever seen, and a high beam that will easily go the distance. Kuria Optic clear lenses maximize intensity throughout, and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.
Mounting Hardware: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of the kit are designed to adapt the Morimoto Mini 7.0 Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome.
Optional HID Ballasts: Designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
Optional H1 HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight--and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Optional Relay Harness: As one of the most important parts in any HID lighting upgrade, don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are or how good your bulbs are, if your harness is a piece of crap, when it gives out your headlights are gonzo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. With triple-sealed twin relays, 14ga. stranded copper wiring, over-molded fittings, and plug-n-play functionality, it will ensure everything functions properly and permanently from the original in-cabin controls. It's easily the best headlight wire harness out there.
Optional High Beam Splitters: Double high beams?! whaaaat! Put simply, the optional Morimoto high beam splitters allow you to make this feature work easily without any cutting or splicing to the factory wiring by diverting power from the halogen bulb into the projector's high beam solenoid, making them both work at the same time.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
PROJECTORS: 2x Morimoto Mini H1 7.0
RQ BRACKETS / HARDWARE: 2x Custom G10 Fiberglass / Stainless
OPTIONAL HID BALLASTS: 2x Morimoto XB35 AMP
OPTIONAL H1 HID BULBS: 2x Morimoto XB
OPTIONAL WIRE HARNESS: 1x Your Preference
OPTIONAL HIGH BEAM SPLITTERS: 2x Morimoto Splitters
OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber
WARRANTY: 5 Years
2003-2014: Subaru Legacy / Outback
CAPABILITIES: Both Low & High Beam
CERTIFICATIONS: Exceeds DOT requirements
APPLICATION: HID and LED projectors are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE Note: This usage regulation is not unique to Morimoto projectors. All LED and HID projectors from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, CLICK HERE
HOMOLOGATION ECE: NO
DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
OPERATING RANGE: -40C to +125C
XB BALLAST INPUT: 9-32VDC
XB BALLAST OUTPUT: 85VAC 35W
XB BALLAST MAX V: 25kV (at start-up)
XB35 BALLAST LIFESPAN: 2500 Hours
3000K BULBS: Golden Yellow (~2800 lm)
4500K BULBS: Warm White (~3500 lm)
5500K BULBS: Pure White (~3400 lm)
6500K BULBS: Cool White (~3200 lm)
XB55 50w Ballasts: Not Compatible
2013 subaru legacy 2.5i
Steve Craig Reviewed: 6/23/2018 10:25:57 pm
Installed these to replace pathetic halogen stock projectors...the light on these is great, wish the H1 system could utilize the 50w Ballasts for extra light...only thing I would have done differently is find a better place to have the wire for the projector shutter exit the headlight housing, as of now the bulb wires as well as the shutter wire exit through the cover that seals the headlight...great upgrade, makes you wonder why these vehicle manufacturers don't put these systems in to begin with
Isaac Reviewed: 9/11/2019 12:31 pm
Fairly easy install into my 2007 Outback. Projectors were a direct bolt-in swap, but the HD harness took some finesse to get enough wire length. It would have been nice to have just 6" more length for a couple of the connections, but I got it installed neatly with time.
<br>Light output is much better than stock, with a clean, crisp beam cutoff. Everything works better than I'd hoped it would!
Worth the Time & Money
Alex Miller Reviewed: 4/17/2017 2:39:07 pm
I had tried both LED bulbs and high-quality halogens in the stock 2008 LGT projectors but nothing really came close to the output I was looking for. After coming across these and doing some research I was sold but worried about baking open my OEM headlight assemblies. Happy I took the plunge. This was my first attempt at a retro-fit but the process went smoothly and easily. If you take your time and follow the instructions everything will fit up just fine and be perfectly sealed. The output and cut-off of these projectors & bulbs is incredible compared to stock. Running the 9005 splittler allows the stock high-beams to come on as well for massive amounts of down-road lighting. This Morimoto kit was worth every penny and I couldn't be happier with the results. Customer service was quick to respond with any questions I had, too. Kudos to TRS for a great product & service!
Insane improvement! 2013 Legacy
Alexander Reviewed: 2/20/2015 6:24:52 am
I started with the Morimoto H7 kit in the OEM projectors. Finally got the nerve to open the headlights and am embarrassed I didn't do it sooner! Far exceeded my expectations in which were already high. Do yourself a favor and buy the high beam splitter with this order. OEM high beams with the bi-xenons is astounding! I do have my DRL's unplugged from the high beam and connected it to aftermarket LED DRL's. Best lighting upgrade I've ever purchased. In combination with the XB LED Type S fogs..... They compliment each other very well! Thanks TRS for outstanding products and excellent customer service!
Raymond H Reviewed: 9/11/2019 12:31 pm
This kit was pretty easy to install, no issues at all and what a upgrade in lighting. Since I had the head lights apart I painted them black and love the look, my neighbor that helped during the retrofit couldn't believe how much different the car looks and was amazed at the output of these lights!