Application-Specific Retrofit Kit
Retro-Quik: Subaru Impreza (08-14)B-RFK-RQIMP-TRS
[ In Stock: pieces ]
Starting at $X.XX/month with
Lucky You: The EJ20 and EJ25 are famously rock-solid flat fours. What isn't solid is the performance of those aging stock headlights. Fortunately, the Morimoto Retro-Quik system is designed as a direct bolt-on upgrade for a big performance boost inside the headlights on all 08-11 Subaru Imprezas and 08-14 WRX/STIs.
Bi-Xenon Projectors: The most compact high performance Bi-xenon projectors from Morimoto. With their small framework and compact 2.5" lens, they fit where most don't. Convenient mounting points match the bolt pattern on several modern OEM Japanese applications, making them a direct swap in many cases. But don't let their size fool you. We're gonna go ahead and say not many projectors will out-shine the 4TL-R. Their light output is similar (we might even say better) than the bigger Morimoto Mini D2S 3.0. Even with a clear lens swap and an experienced hand, you would be hard-pressed to tune any OEM projectors to come close in the performance department!
Mounting Hardware: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of the projector retrofit kit are designed to adapt the Morimoto 4TL-R Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome.
Optional HID Ballasts: The optional Matsushita G5 ballasts are Subaru's choice for the OEM HID option. Using three mounting points per ballast, these mount to the underside of the headlight in the OEM-molded spot, and route their outputs inside the headlight with a slick water-resistant seal. Cleanest retrofit ever? We think so!
Optional D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight--and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Optional Relay Harness: As one of the most important parts in any HID lighting upgrade, don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are or how good your bulbs are, if your harness is a piece of crap, when it gives out your headlights are gonzo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. With triple-sealed twin relays, 14ga. stranded copper wiring, over-molded fittings, and plug-n-play functionality, it will ensure everything functions properly and permanently from the original in-cabin controls. It's easily the best headlight wire harness out there.
Optional High Beam Splitters: Double high beams?! whaaaat! Since the Camry has a pre-existing halogen high beam and the new projectors in the Retro-Quik system have their own bi-xenon high beams, you'll have no problem lighting up the back roads. Put simply, the optional Morimoto high beam splitters allow you to make this feature work easily without any cutting or splicing to the factory wiring by diverting power from the halogen bulb into the projector's high beam solenoid, making them both work at the same time.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
PROJECTORS: 2x Morimoto 4TL-R
RQ BRACKETS / HARDWARE: 2x Custom G10 Fiberglass / Stainless
OPTIONAL HID BALLASTS: 2x Matsushita Gen V D2S
OPTIONAL D2S HID BULBS: 2x Your Preference
OPTIONAL WIRE HARNESS: 1x H7 or H11 HD Relay
OPTIONAL HIGH BEAM SPLITTERS: 2x Morimoto Splitters
OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber
WARRANTY: 3 Years
2008-2014: Subaru WRX / STI
2008-2011: Subaru Impreza (All Models)
2006-2007 WRX / STI: NOT compatible
2012+ Impreza: NOT compatible
APPLICATION: HID and LED projectors are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE Note: This usage regulation is not unique to Morimoto projectors. All LED and HID projectors from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, CLICK HERE
HOMOLOGATION ECE: NO
DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
OPERATING RANGE: -40C to +125C
BALLAST INPUT: 11-16VDC
BALLAST OUTPUT: 85VAC 35W
BALLAST MAX V: 25kV (at start-up)
BALLAST LIFESPAN: 2000 Hours
4500K BULBS: Warm White (~3500 lm)
5500K BULBS: Pure White (~3400 lm)
6500K BULBS: Cool White (~3200 lm)
09 impreza outback sport
Josh Stancil Reviewed: 2/27/2019 4:53:17 am
I bought everything from the OEM ballast, Phillip's bulbs, high beam split wiring, HD relays and made the mistake of buying the foglights as well. So far it's all been super easy to put together but they could probably use an update on YouTube as far as install video goes. Other thing that would help out is if TRS labelled on the foglight option that they only fit 11-14 body. I didnt know any better going into it and im.fairly new to this body style so I just assume old when it said gr foglights that they would fit. After frustration and going on morimoto site I saw the years it did fit. Later on I saw the foglights listed by the reviews and noticed separately they do say the years. Luckily I was able to sell the foglights fairly quickly locally! The 2 stroke led high beams are already installed just waiting on my hid foglights to make it hear!
Awesome setup, fit like a glove
steven Reviewed: 3/8/2015 3:41:39 am
Awesome kit, have done a few retro's and I must say this is the way to go. No drilling , cutting or praying that you don't break something. Everything fits right in and you could really knock out the install pretty quickly if you needed to.
<br>product- really happy with the morimoto components, night driving is so much more enjoyable with these bad boys And let's face it they look awesome when your lighting up the road for the cars in front of you.
<br>TRS- have purchased a few items from TRS and every time everything shows up as it should and in a very timely manner. Would recommend TRS to anyone looking for lighting products. Great products and services.
<br>Overall if your thinking of retrofitting your lights go this route, no guesswork and a great overall product.
Complete retrofit 2014 WRX
Tomasz Klos Reviewed: 1/29/2018 10:58:42 am
This review is about my experience about this retrofit project. I have a 2014 WRX and after years of using just aftermarket HID kit (just bulbs and ballasts) one of the ballasts went down. I decided to order a LED light bulbs ( the kind that have the fan on the back for cooling) and this was even bigger disappointment. So i finally decided to do a complete retrofit. I ordered the whole set (projectors, bulbs, ballasts, wiring harness, butyl, and the brackets for my car model). Let me just start by saying it was not a direct swap. Some grinding of the OEM bracket/light fixture was needed along with a longer standoffs to make the projector straight. Let me explain on that one a bit more. Once i had the headlight disassembled i got left with the projector bracket that is also a High Beam reflector as a one piece. I then installed the thick bracket on top and fixed it with OEM screws (as per instructions). Then I inserted the new projector and already noticed that is hitting the OEM bracekt in multiple spots. One spot was in the corner where is a insert that is used for light adjusting screw. That area had to be carved out just enough so the insert would be able to go back in place. Then there was an area on the sides of the projector that had to be carved out. At the end there was an area on the bottom where the Bi-xenon solenoid housing would hit, and that also had to be carved out. No big deal for a dremel. Just be careful, that material is super fragile (fiberglass). Once the needed room was created the new projector had enough room all the way around to be installed. Then i moved on to the lower, thin, bracket and using the provided 10mm standoff between the OEM bracket and the projector with thin bracket it would make the projector come out on a very big angle out of the OEM bracket. Compared the OEM projector installed and it was mounted to the OEM bracket and almost 90deg. If I would mount the new projector to the OEM bracket using provided hardware my low beams would be positioned way to high and being it a one part with High Beams, it would bring my High Beams way too low after adjusting. So after quick math and sampling i decided to extend the provided 10mm standoff to about 13-14mm ones along with longer screws. Alos if I tried to use the 10mm standoffs, the thin fiberglass provided bracket would not clear the OEM bracket. I had to cut flush with the new projector. Once the longer standoff were installed the thin fiberglass bracket was out of the OEM housing and no hitting issues. So with longer standoffs and loger screws i was able to get the projector to come out of the OEM bracket at closely 90 deg just like the OEM. After these issues were resolved i re-assembled the headlights and installed on the car. Checked if all works ok and it does. One more thing about the wire harness. I ordered the High Beam splitters and the relay kit. The relay kit i did not have a chance to install but it looks like a good quality set. If I have any troubles later i might put it in. The High Beam Y splitter was ok and it works but the wires are on the wrong side. Coming out of my OEM wiring to High Beam i have the Red on one side and Black on the other. Going into the Y harness the Red goes to two balck wires and the Black wire goes to Red and Blue wire. It does not matter because on the other side it comes out the same so just the colors are swapped but not the polarity. As a final results that was exactly what I was looking for, Very bright, light goes vary far far away. Illuminates a lot of road all the way to the cut of which is crisp and sharp. The High Beams are even better and it all works with the OEM High Beams and DRL. Hopefully it will last long. In the end its worth the money and time. Not sure If i got the wrong brackets or what but mine was not a direct replacement even with the hardware provided. And specially with the 10mm standoffs being 3-4mm too short. Would not call it direct retrofit. I have pictures from the install if someone is interested in details.
Couple issues, overall good!
ahla Reviewed: 5/10/2015 10:17:38 am
So, EX-girlfriend bought me this for Christmas. Waited till summer to install and today 5/9/15 i did. I guess the newer brackets are carbon fiber or something but my older kit used steel ones. The provided bolts did not fit the predrilled holes on the brackets, so maybe that's changed, but I had to enlarge the holes and use my own hardware. I was slightly disappointed that it didn't come "tuned" as i expected it to. Also, the projector is supposed to come with little parts of it trimmed of so they fit the stock housing. Both of mine were trimmed for the driver side headlight by accident. Nothing a little grinding couldn't splve. Overall though, it's bright. Has a sharp cut off. But again, no color amd i had to fiddle quite some bit to make them work so im a little disappointed. As reference, i've retrofitted three E36 M3 headlights with RX-AFS projectors, one 09 civic with RX-AFS projectors, a 96 civic with FXR projectors, and a SV1000s with morimoto mini H1 projectors.
Dan Reviewed: 4/6/2014 6:24:43 pm
Installed this on my Impreza a few weeks ago and couldn't be happier with the outcome. It's easily at the top of my list for most rewarding mod to my car so far.
<br>On a side note, the TRS support crew has been awesome through the entire process, before and after. They were great and communicated exceptionally the whole time.
Huge improvement over the Mini D2S 2.0 RQ.
John Reviewed: 7/9/2016 5:29:39 am
I'm not a DIY expert by any means. So I rely on these Retro-Quick kits that TRS sells. I initially purchased the RQ MiniD2S 2.0 kit for my 08 Scion XB. They were no brighter than my OEM projectors with the squirrel finder removed. I was deeply disappointed after spending so much money and time opening the headlights.
<br>Once the new 4TL-R RQ kits came out I immediately jumped online and purchased a set. Opened up the headlights, tossed the old Mini D2S in the garbage, trimmed a bunch and secured the new projectors in place. I didn't even bother to test fit the projectors before sealing them up. Slapped them back on the XB. Powered them up and BAM. Night turned into day right in front of me. Man I was so joyed. Rotation was spot on, had to align it a little.
<br>Man, I wished these came out long ago so I didn't have to waste my money on the MD2S 2.0. I was totally impressed but one thing I do have to point out, they are not wider than OEM 4gTL that I have on the Odyssey. But definitely worth it since I didn't have to tune it with clear lenses and spacer mod (which I had to do with the OEM 4gTL).
<br>Thank you for reading!
Evan Reviewed: 5/3/2014 4:25:20 pm
This was my first retrofit experience, although I had replaced headlights, and installed the less expensive (read: inferior) HID kits from other sources. The kit was shipped quickly, and was not missing any parts upon arrival; in fact, there was a checklist in the package with human checkmarks! Just to be safe, I tested everything before even attempting installation, it all worked as expected. I was impressed of the quality of all the components.
<br>As far as the installation went -- TRS provides both PDF documentation and has a Quick Tips video on Youtube, both of which were extremely useful. Read them or watch a few times before installation, it will go much faster. Give yourself plenty of time, and don't rush. I had to use a dremel and take a bit of plastic off by the upper outside adjustment point, on the inside of both reflector assemblies before installing the projector (testing before putting the lenses on had rotational alignment issues).
<br>Finally, I was very impressed with the output of the projectors, and the overall OEM look of the kit -- everything fit as it should, and having Bi-Xenon plus the high beams throws an incredible amount of light onto the road. Sure, there's better projectors out there, with better optics, but for the ease of installation, this kit can't be beat.