Like the Look: Of your aftermarket headlights but can't see a damn thing while driving at night? Yeah we know, we hear it all the time - and that's why the Morimoto Retro-Quik system is so awesome. Using laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the cheapo projectors that came in your lights - you get the best of both worlds!
Spec-D Lights: Can vary, but the same. To ensure this kit will work on your housings; be sure to match up the template to the existing projector to ensure they're a match. The template can be seen in our Installation Guides section.
Mini H1 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The Super version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models.
Optional HID Ballasts: Morimoto’s XB ballasts are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in on place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Hardly are all aftermarket-HID ballasts the same, and the XB’s make that clear in most every category in our opinion.
Optional H1 HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Optional Relay Harness: As one of the most important parts in any HID lighting upgrade, don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are or how good your bulbs are, if your harness is a piece of crap, when it gives out your headlights are gonzo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. With triple-sealed twin relays, 14ga. stranded copper wiring, over-molded fittings, and plug-n-play functionality, it will ensure everything functions properly and permanently from the original in-cabin controls. It’s easily the best headlight wire harness out there.
Optional High Beam Splitters: Double high beams?! whaaaat! Put simply, the optional Morimoto high beam splitters allow you to make this feature work easily without any cutting or splicing to the factory wiring by diverting power from the halogen bulb into the projector’s high beam solenoid, making them both work at the same time.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn’t prevent their new headlights from fogging up is beyond us. It’ll be the best twelve bucks you’ve ever spent.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
RQ BRACKETS / HARDWARE: 2x Custom G10 Fiberglass / Stainless
WARRANTY: 5 Years
OPTIONAL HID BALLASTS: 2x Morimoto XB35 AMP
OPTIONAL H1 HID BULBS: 2x Morimoto XB
OPTIONAL WIRE HARNESS: 1x Your Preference
OPTIONAL HIGH BEAM SPLITTERS: 2x Morimoto Splitters
OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber
SPEC-D HOUSINGS: Matching the listed bracket dimensions / shape
BALLAST WATTAGE: 35W ONLY
CAPABILITIES: Both Low & High Beam
OPERATING RANGE: -40C to +125C
XB BALLAST INPUT: 9-32VDC
XB BALLAST OUTPUT: 85VAC 35W
XB BALLAST MAX V: 25kV (at start-up)
XB35 BALLAST LIFESPAN: 2500 Hours
3000K BULBS: Golden Yellow (~2800 lm)
4500K BULBS: Warm White (~3500 lm)
5500K BULBS: Pure White (~3400 lm)
6500K BULBS: Cool White (~3200 lm)
First off let say that the customer service is awesome and very helpful. Product was shipped fast and came in without any harm, clean awesome works flawless . will definitely be doing some more shopping at TRC. Thanks for all the help and great product.
Very impressed with the light output of the projectors and HID combo BUT the dedicated Spec D brackets in this kit don't fit the Totota Celica Gen 7 set of Spec D headlights. I had send the kit and my headlights to a professional installer who said he couldn't use the brackets but had to fabricate/modify his own. Trimming won't help due to the sheer difference in size. TRS refunded me some money for the brackets so I can't complain. Great service. A big thanks to David too.
Lights are awesome, but the mounting holes on the plate does not line up the projectors perfectly, so drilling is required.
Besides that they are great
(Note from TRS: We are modifying all future kits based on this feedback, ensuring this does not happen to anybody else)