Brake Lights: So bright they can't be missed. The Morimoto 5Stop LED brake lights uses five strong 5W Red LED's to illuminate the rear-end of your bike and indicate to following traffic when you're slowing down.
Safety: Is just as important as good looks when it comes to the motorcycles. Thankfully the 5Stop has both bases covered here, since these are a great, clean looking way to replace a big bulky tail light on a motorcycle - but also a very functional one with their dual-intensity circuit.
Wiring: Is about as easy as it gets here. The 5Stop has a simple 3 wire input that will integrate/replace most pre-existing motorcycle tail light circuits. 12V+ for the normal running light. 12V+ for the bright/brake light, and a ground.
Heavy Duty: Their CNC Machined, 6061 Aluminum body has been anodized with a beautiful gloss black finish for a stealth look once mounted. A low-profile mounting bracket and hardware is also included. The angle of the unit once mounted is also fully adjustable!
Bomb Proof: The internal LED circuitry is completely protected against the elements with a hard acrylic potting compound. Damage from moisture, dust, or dirt is no threat.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
BRAKE LIGHT: 1x Morimoto 5Stop
MOUNT: 1x Bracket & Hardware
WIRING: 3-Wire Inputs
WARRANTY: 3 Years
SWAG: TRS Decal
APPLICATIONS: Motorcycle Brake Lights
INPUT: 3 Wire (un-pinned)
INPUT RANGE: 12-24V
RATED LUMENS: 400lm (dim mode)
RATED LUMENS: 800lm (bright mode)
POWER DRAW: 417mA
LIFESPAN: 50,000 hrs
LIGHT SOURCE: 5X 5W Nichia LED
INPUT: 3-Wire 12V+/Ground
INPUT LENGTH: 24" / 610mm
INPUT RANGE: 12-24V
SHELL MATERIAL: Machined Aluminum
My 08 ZX6R was in desperate need of lighting upgrades all around. I was still running the brake light that came with my exhaust system almost 10 years ago. All I can say is WOW!!! The pictures on the site do not do this light justice at all. The light out put is amazingly bright both the running light and break light. The construction of the housing and parts are all top notch and built to last. Helped update and make the rear lighting of the bike look so much better.
I highly highly recommend this light!!!
I have a motorcycle that has only a single bulb tail light. I swapped out the standard incandescent bulb for the highest power LED replacement I could find... big improvement, but still it was a just one bulb guarding my "six" from intruders. I mounted this Morimoto red 5-LED array just under the tail light lens - hardly notice it there... until I turn on the bike. Ahhh... what a beautiful thing! The color is a perfect color match to my red LED inside the DOT red lens, and the intensity matches the very expensive top-shelf LED bulb I had installed - but now there are 5 more of them! The off-axis power remains full intensity up to 30+ degrees. I love cruising at night with these new brake lights and touching the brake just enough to trip the brake light switch and watching in the rear view mirrors all the reflective signs as far back as I can see suddenly "turn on" in blazing red. Morimoto... we need these also in Amber for turn signals!