Mopar-Spec: 9007 Bi-XenonB-WIR-MPR9007-TRS
[ In Stock: pieces ]
Starting at $X.XX/month with
Chrysler Canbus: Modern Chrysler products like the Dodge Ram trucks all have super picky "can-bus" systems that monitor for changes in the headlight circuit and cause all kinds of problems when doing an HID conversion. When a normal harness just won't cut it, we always recommend the Mopar Spec MotoControl Bi-xenon relay harness from Morimoto.
What's in a Name: Though its name suggests it will only work on a Chrysler vehicle, this harness is becoming more and more commonly needed on a lot of modern vehicles. Don't have a "lamp out" warning, but suffering from annoying pulsing current coming from your factory headlight circuit and causing your lights to flicker? this is your answer.
Can't Resist: The 9007 Bi-xenon Mopar Spec harness utilizes two 50W load resistors with unique blue anodized heat-sinks to safely add that "missing" resistance back into the headlight circuit. There is also a 4700mF capacitor to help absorb any pulsing signals emitted from the stock output for uninterrupted relay function.
Under Control: Morimoto makes it easy with the MotoContro 9007 Bi-xenon relay harness. Designed to be completely plug-n-play; it's a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi/Lo HID systems.
Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector was recently updated in 2015 and is a major reliability upgrade compared to other bi-xenon harnesses.
Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old.
Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed).
OEM Grade: Aside from being ahead of the game from a technical standpoint, the Morimoto Spec Bi-xenon Harness is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
RELAY HARNESS: 1x Mopar Spec 9007/9004 Bi-Xenon
RELAY: 1x Silver WeatherPack MotoControl High/Low
CAPACITOR LINK: Removable 4700uF
RESISTORS: 5x Morimoto HD Load Resistors
RH HARNESS: 9007M>9006F Resistor Link
WARRANTY: 2 Years
NOTE: One Harness Controls Both Headlights
STOCK BULB SIZE: 9007 or 9004
SYSTEMS: Bixenon Projectors & Telescoping Hi/Lo HID Bulbs
HALOGEN BULBS: NOT Compatible
OTHER BRANDS: May need High Beam Adapters
INPUT TRIGGER: 1x 9007/9004 Male
BALLAST OUTPUTS: 2x 9006 Female
HIGH BEAM OUTPUTS: 2x 9006 Female
12V POWER: 1x Nickel-Plated Ring-Type
GROUNDS: 7x Nickel-Plated Ring-Type
FUSE: Inline 25A
Tim Garza Reviewed: 6/16/2019 11:37:17 pm
Worked flawlessly and was plug and play. The braided wire loom makes the harness look even better. Harness is worth the price.
Bryan Reviewed: 9/18/2014 4:16:16 pm
I expected to have to do some splicing, or modifying to get the harness to work for my needs with my 03 Dodge. I've been in the automotive electronics field for over ten years, currently hold an MECP Advanced cert. and my shop currently does a lot of car audio installs, so I didn't expect it to be a big deal. What I found out was that I didn't need any prior experience to connect this harness. As a matter of fact I installed the harness, and ballasts while the paint was drying on my headlight retrofit. It was just plain easy, and the quality of the wire, and connectors was top notch. The system works with no flicker, or "bulb out" on my truck. I would have trouble building a harness like this for less money, and the ease of use allows me to charge my customer's less for labor, and increase my productivity. Great job TRS!