Application-Specific Harness

Mopar-Spec: 2015+ Low Beam


PART #: 1 x H105

[ In Stock: 0 pieces ]


Product Details

The new Mopars: May be the best ones yet, but when it comes to upgrading anything in the lighting system; it's nothing but a nightmare. Thankfully though after many attempts, the new Morimoto 15+ Mopar Spec harness does the trick to keep an aftermarket HID system running smoothly.

Lamp Out: When upgrading to HID lights on the 2015+ Mopar vehicles, the car's ECU senses a change in the resistance of the headlight circuit and cuts power to anything but the stock 9012 halogen bulbs after a few minutes in use. Good luck with basic "canbus" ballasts or other more conventional "canbus" harnesses. They wont work, many will claim success, many have failed! This is the only setup on the market that we know of that does the trick on 2015+ Chrysler/Dodge/Jeep/Ram vehicles.

Calibrated: The 15+ Mopar Spec harness is properly calibrated to tame the canbus system on the new Mopar vehicles. Using a quad configuration for it's load resistors that's unique only to this harness in conjunction with a special anti-flicker capacitor and twin relays - the harness will absorb any pulsing signals emitted from the stock output for uninterrupted relay function. No flickering or pulsing!

Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Regardless if you're using a Dodge Ram LED headlight kit or an HID system, this harness ensures nothing goes into panic mode!

OEM Finish: Aside from being a technical masterpiece, it's also a work of art. With its braided TechFlex insulation, anodized and laser engraved relays, and 100% weather resistant dual relay pack to power the ballasts. it will surely look factory-fresh under the hood.

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!

Product Specs

  • What's Included

  • Harness: 1x Mopar-Spec 2015+ Single Beam Harness (incl. Relays, Resistors, Capacitor Link)

  • Optional Adapter: 2x H11 Input Adapters

  • Warranty:2 Years (Click for Details)

  • Note: One harness controls both headlights

  • Compatibility

  • VEHICLES: 2015+ Chrysler, Dodge, Jeep

  • STOCK BULB SIZE: 9005, 9006, 9012, H10, H11

  • HID SYSTEMS: Low Beams, High Beams, or Fog Lights

  • BI-XENON PROJECTORS?: You'll need High Beam Splitters

  • Tech Specs

  • Input: Your Preference

  • Output: 2x 9006 Female

  • 12V Power: 1x Nickel-Plated Ring Terminal

  • Ground: 2x Nickel-Plated Ring Terminals

  • Fuse: Inline 25A

Product Reviews

4.8 out of 5 stars

6 Reviews   Write a Review

4 out of 5 stars

2015 Jeep Cherokee


I needed this to keep my lights on and stop the Low beam out warning on my dash. The install was a bit more than I originally hoped for with my "Plug and play" hid kit but was very easy to install and was completely labeled. It didn't work for me at first. I had take out the grounded capacitor that came on the harness and now everything is working without any problems. No flickers and both lights are staying on with no dash warnings. Not a deal breaker but I got a used kit that was all dinged up and i could tell that it wasn't new. For $115 you would expect everything to be brand new. It's all working properly and you can't see any of it under my hood but it's just the thought of what someone else did with it and how much it was actually used before I got it.

5 out of 5 stars

2017 Dodge Durango GT

Olakunle Ekundare

My Durango came with the factory halogen projectors and I knew I'd be pursing a retrofit of sorts. I ordered this kit after speaking with the folks at TRS and I can say that the kit was relatively easy to install. The biggest challenge was finding ideal locations to mount the resistors and running the wires properly. Upon completion the lights fired up with no issues and no unnecessary lights on the dash. This harness makes a retrofit upgrade on a MOPAR vehicle as painless as possible.

Well done TRS!

5 out of 5 stars

2015 jeep cherokee trail hawk

john appel

i got the oem kit with the toyota ballest and the mopar harness and was getting the low beam out message and lights would turn off they sent me another harness had it in three days , letting install people know that do not install capacitor to resistors , as that was the problem , lights are awesome ,and my wife can see at night better then ever quality product great support highly recommend best hid kits on the market hands down

5 out of 5 stars

2017 Ram Projector CANBUS fix

devarian .

Bought this to use with my already installed HID kit. Fixed my light out message issue and plan to buy TRS ballast when i start having issues.

5 out of 5 stars

Problem solved

devarian .

Already had HID kit in my 17 Ram. even though the kit was suppose to be CANBUS applicable, it wasnt.

Thankfully this fixed the bulb out issue and it was a much better kits.

5 out of 5 stars

Works well with the Dodge Dart


I have tried just about every kit from TRS on the dart and nothing wanted to be full proof with the canbus harness worked but it was hit or miss. Some work great some didn't. I got my hands on the new Ram spec resistors and wired it up into my current mopar spec relay and things seem to be great! This car is a nightmare for HIDs haha