Double Standard: In the HID Headlight Retrofit world there are two standards for high beam outputs. "Molex" two pin connectors and 9006.
9006 Female & Molex Male: These will allow you to use another vendors bi-xenon harness with our bi-xenon projectors.
9006 Male & Molex Female: These will allow you to use our bi-xenon harness with another vendors hi/lo bulbs or bi-xenon projectors
NOTE: Please note that Male and Female refer to the metal pins inside the plastic housings, not the connector housings themselves.
For best results: TRS spec's only 9006 Male and Female sockets for our high beam inputs and outputs on our harnesses. Don't make the mistake of thinking your solenoid is dead just because of a poor connection - try our full kit!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
ADAPTERS: 2x Molex / 9006
WARRANTY: 2 Years
PROJECTORS: 9006 or Molex Male Solenoid Inputs
WIRE HARNESSES: 9006 or Molex Female High Beam Outputs
HALOGEN BULBS: Not Compatible
WIRE THICKNESS: 22 AWG
LENGTH: Approx. 4" / 120mm
INSULATION: Braided TechFlex
INPUT: 9006 Female or Molex Male
OUTPUT: 9006 Male or Molex Female