Mini Graphite: One of the available "standard" options for the Morimoto Mini H1 bi-xenon projectors, these unique looking shrouds are composed of translucent smoked gray plastic that glows when the lights are on. Since it wont fit anything else, the Mini Graphite shrouds are a no-cost option with the Morimoto Mini H1 projectors.
In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.
Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.
LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below. These shrouds feature a unique smoked translucent plastic that will glow with light if you wanted to do something a bit different and mount the halos inside.
Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
SHROUDS: 2x Mini Graphite
WARRANTY: 5 Years
SWAG: Morimoto Decal
INTERNAL HALO SIZE: 80mm
FRONT HALO SIZE: 80mm
FINISH: Smoked Translucent
These fit on the ring of the Morimoto Mini H1 7.0 perfectly, 4 small tabs keep it concentric. They look great! What is odd is that there are 4 screw holes on the back that do not line up with the 7.0's at all, their diameter is 1 CM too big. If they were made for these projectors, why don't they line up the rear screw holes for a proper attachment to the projector? I wouldn't have to glue anything then. Although they are the smallest shrouds they still require top and bottom trimming for 2000-2006 Tahoe/yukon/burb and 1999-2002 Silverado.
Paired these with the centric rings, and XSB Halos. Blown away by how badass these look. WIth the red passive demon eye the headlights look downright evil. Give the whole car a sinister feel to it.
As always, quality is offthe charts with TRS!