No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Jeep, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
FOG LIGHTS: 2x Type M Morimoto XB LED
WIRING: Plug-n-Play Connection Kit
OPTIONAL: Lamin-X Yellow Film Kit
WARRANTY: 10 Years
SWAG: Morimoto Decal
REPLACES MOPAR PART #: 5182026AA
GRAND CHEROKEE: 2011-2013
CERTIFICATIONS: DOT, ECE, SAE
INPUT SOCKET: Sealed 9006 Male
WEATHER RATING: IP67 Waterproof
LENS MATERIAL: High Impact Polycarb (UV-Resistant)
SHELL / HEAT SINK: Powder Coated Cast Aluminum
LIGHT SOURCE: 3x Philips Luxeon-T
LED OPTICS: Kuria Fog-Projection Lens
INTENSITY: 1,200lm (raw; each)
COLOR: 5500K (Pure White)
These are really good and bright too, could be brighter but considering these are for fogs they dont need to be. These project the light better than standard fogs and with the instant on of LED plus the width of the light optics make these an ideal upgrade to everyone fog lights. Highly recommend these worth the money.
I installed these on my 2014 Cherokee trailhawk. Install was simple and with the correct wiring adapters it took less than 30 minutes. After seeing how nicely focused and wide the pattern is on these lights I'm convinced that the stock fog lights were just there for looks. I am completely satisfied with these especially for the price.
installed in about 30 minutes with H16 adapter,complete plug and play,no flicker,and amazing beam pattern,2012 wrangler unlimited,very satisfied
Application: 2011 Dodge Charger .
Review: Installed these Fog lamps a few days ago, I was amazed to see the light output, the light is more focused then any HID or LED fog conversions that I have previously done, with a nice cut-off right below the Hid headlamps. Color matches my 5K Hid Headlamps nicely as well, Will recommend it to any MOPAR vehicles, as this kit works on multiple Dodge & Jeep applications.
FYI: THIS KIT WILL REQUIRE A WARNING CANCELLER CAPACITOR TO WORK PROPERLY, NEWER DODGE AND JEEP VEHICLES HAVE NO SEPARATE RELAYS FOR HEADLIGHT AND FOGS, SO THE CANBUS/ PWM MODULE FITTED IN THE CARS WILL PULSE OR FLICKER THE BULBS, AFTER ADDING THE WARNING CANCELLER CAPACITOR, IT IMMEDIATELY FIXED THE ISSUE AND WORKED FLAWLESSLY