No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Ford, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
FOG LIGHTS: 2x Type F1 Morimoto XB LED
WIRING: Plug-n-Play Connection Kit
OPTIONAL: Lamin-X Yellow Film Kit
WARRANTY: 10 Years
SWAG: Morimoto Decal
REPLACES FORD PART #: AL1Z-15200-BCP, BL3Z-15200-ACP
F150: 2007-2010 (Req. 1x Mounting Bracket)
CERTIFICATIONS: DOT, ECE, SAE
INPUT SOCKET: Sealed 9006 Male
WEATHER RATING: IP67 Waterproof
LENS MATERIAL: High Impact Polycarb (UV-Resistant)
SHELL / HEAT SINK: Powder Coated Cast Aluminum
LIGHT SOURCE: 3x Philips Luxeon-T
LED OPTICS: Kuria Fog-Projection Lens
INTENSITY: 1,200lm (raw; each)
COLOR: 5500K (Pure White)
Looks great with the yellow film and it contrasts nice with the 5000K projectors I also purchased. Very happy. Incredibly easy to install and aim.
great, happy with this
I purchased the lED lights to replace the stock ones on my 2007 F150 Lariat, it was such a big improvement. No complains on that but I do have to say with the required bracket for 2007 thru 2010 is incorrect. According to the link on website I needed this "Genuine Ford BL3Z-15266-B Fog Lamp Bracket" which at least on my truck it's incorrect and will bolt onto the my trucks bumper, it has a different bolt pattern. I had to use safety wire just to hold it in place until I can figure out how to permanently fix the mounting. So don't waste your time on the bracket and if you're not mechanically inclined you will need help from someone who is.
Completely satisfied with these fogs. They compliment the HID headlights well and are just plug and play. For the 07 and 08 F150 you DO NOT need any bracket or bucket, just mount the driver's side fog upside down. The beam is identical and like I said, just plug and play.
Installed these on my 2008 Ford Ranger. Install was very simple only took about 30 mins. The output and cutoff is amazing very pleased with the product and customer service
I purchased these LED fogs with the idea that it would throw more light on the sides of the road while still staying legal from a DOT compliant side. The bonus was that the 5K temp of the output is a close match to the factory HIDs on my truck.
TRS has a good history of customer service, I say this from personal experience. The build quality of these lights is excellent, and the 5 year warranty is confidence instilling.
While they do have a extremely wide beam,I think the usable output is equal to or less than the factory fog lights. If you are looking to match your HIDs, then these will satisfy you.
If you are looking to summons the sun and make a huge amount of light - look into a light bar/some off road only lights.
I threw these in finally after getting them in a group by a month ago. The beam is fine and sharp. They made a huge difference at night, even with my factory hid in my f150. The color doesn't match my stock lights but I ordered new lamps with a slightly higher Kelvin soo it matches. Very happy!
High quality...perfect fit. These are some very nice lights. They were a breeze to install., about 15 minutes to remove stock ones and install the new LED fogs. 3 bolts to remove the original housing, snap the old ones out and the new ones in....put the connector on, pay attention to polarity and test before you put the housing back in. If you measure where the original adjuster screw is before you take the old one out..it makes adjusting the new ones easier...just slight adjustments needed. Had to use the old sheet metal adjustment screw as I could not get the machine screw that came with the lights to work for the adjustment. I am very pleased with these lights. Color is prefect with the HID headlights and they look great in my FX4 Tremor with the blacked out HID headlights. I am very glad I made this purchase. They look fantastic install, with the lights on or off. I am sure as others see these lights, they will want the same for their trucks. Can't go wrong with these XBLED fogs.