Vehicle-Specific LED Projector Fog Lights
Ford F150 (04-14): Morimoto XB LEDB-FOG-14F150-TRS
[ In Stock: 0 pieces ]
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB fogs: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Ford, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The 2007-2014 Ford F150 LED fog lights are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
Fog Lights: 2x (One Pair) Morimoto XB LED Type F1 Fog Lights
Wiring: Plug and Play Harness
Optional: Yellow Lamin-X Film Kit
Warranty:10 Years (Click for Details)
REPLACES FORD PART #: AL1Z-15200-BCP, BL3Z-15200-ACP
F150: 2004-2006 (with Round fogs)
F150: 2007-2010 (Req. 1x OEM BL3Z15266B Mounting Bracket)
CERTIFICATIONS: DOT, ECE, SAE
INPUT SOCKET: Sealed 9006 Male
WEATHER RATING: IP67 Waterproof
LENS MATERIAL: High Impact Polycarb (UV-Resistant)
SHELL / HEAT SINK: Powder Coated Cast Aluminum
LIGHT SOURCE: 3x Philips Luxeon-T
LED OPTICS: Kuria Fog-Projection Lens
INTENSITY: 1,200lm (raw; each)
COLOR: 5500K (Pure White)
Great set of Fogs
High quality...perfect fit. These are some very nice lights. They were a breeze to install., about 15 minutes to remove stock ones and install the new LED fogs. 3 bolts to remove the original housing, snap the old ones out and the new ones in....put the connector on, pay attention to polarity and test before you put the housing back in. If you measure where the original adjuster screw is before you take the old one out..it makes adjusting the new ones easier...just slight adjustments needed. Had to use the old sheet metal adjustment screw as I could not get the machine screw that came with the lights to work for the adjustment. I am very pleased with these lights. Color is prefect with the HID headlights and they look great in my FX4 Tremor with the blacked out HID headlights. I am very glad I made this purchase. They look fantastic install, with the lights on or off. I am sure as others see these lights, they will want the same for their trucks. Can't go wrong with these XBLED fogs.
I threw these in finally after getting them in a group by a month ago. The beam is fine and sharp. They made a huge difference at night, even with my factory hid in my f150. The color doesn't match my stock lights but I ordered new lamps with a slightly higher Kelvin soo it matches. Very happy!