Vehicle-Specific LED Projector Fog Lights
Ford (3" Round): Morimoto XB LEDB-FOG-FORD3
[ In Stock: pieces ]
Updated May 2018: Due to popular demand, this fog light model is now optional with YELLOW OUTPUT! These use 3000K LED chips to produce a very nice yellow light while retaining the same output as the standard white model, no yellow film needed!
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Ford, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
FOG LIGHTS: 2x Type S Morimoto XB LED
WIRING: Plug-n-Play Connection Kit
OPTIONAL: Lamin-X Yellow Film Kit
WARRANTY: 10 Years
REPLACES FORD PART #: 4F9Z15200AA
FIESTA ST: 2014-2017
TAURUS X: 2008-2009
CERTIFICATIONS: DOT, ECE, SAE
INPUT SOCKET: Sealed H11 Male
WEATHER RATING: IP67 Waterproof
LENS MATERIAL: High Impact Polycarb (UV-Resistant)
SHELL / HEAT SINK: Powder Coated Cast Aluminum
LIGHT SOURCE: 3x Nichia
LED OPTICS: Kuria Fog-Projection Lens
INTENSITY: 1,200lm (raw; each)
COLOR: 5500K (Pure White) or 3000K (Yellow)
FORD (3"): MORIMOTO XB LED
Austin Dillon Reviewed: 10/10/2016 6:08:32 am
I bought these for my 2014 Ford Fusion, and I absolutely love them. I originally used the 35 watt Morimoto HID kit for my fog lights, but wanted something that looked better, and didn't produce glare for other drivers. The stock fog light housings should not have an HID bulbs in them. These fog lights don't produce as many lumens as the HIDs, but you really can't tell. Morimoto did an awesome job designing them. The spread of the beam and the cut-off are perfect. As soon as you open the box, you can tell that these aren't cheap knock-off LED fog lights. These are the real deal! I can easily see in ditches as I'm driving down back roads, or light up the shoulder and/or median on the highway. Also, they come with a 10 year warranty!! If you are on the fence about getting these, just go for it. You will not regret buying these, they are worth every cent!
Ford (3"): Morimoto XB LED Fogs
vadim Reviewed: 2/27/2016 12:47:51 pm
My friend bought these fog lights, said he was pleased with it have nothing to say, he is in great delight, and now I am also currently the order of these lights, as this is the best lights that are in the world!
Morimoto XB LED - Focus ST
Jacob Wright Reviewed: 11/6/2018 1:47:50 pm
I recently lost a fog light bulb to all of the rain that we have been getting in north Texas, so I made the decision to go ahead and upgrade to the Morimotos after some research and finding where TRS has stated that they have only had a couple of sets with failures in the time since these were released. The install was straight forward (Ford made the fog light bezel a little difficult to remove on the Focus ST) and aiming them was easy. Night and day difference in light output between these and the stock halogen lamps.
Great addition to Ford Explorer
Terrence Reviewed: 1/7/2016 10:44:35 pm
I have a 2014 Explorer that I did a summer retrofit of TRS supplied Evo-XRs and Morimoto XB55s running 5500k that turned out amazing. The only challenge: My headlights looked awesome but my fogs were, gulp, incandescent halogens. Every other light, both interior or exterior was swapped to LED so I began looking at TRS for a solution. Initially I was hesitate to order as the projector elements on this were very chrome in appearance, which went against the black on black with chrome accents I did on the headlights. I was revealed to see that Morimoto updated this unit in December and now features a gorgeous dark projector element that gave the dark appearance I wanted.
<br>Installation was a breeze, using a few metric drivers (7, 8 and 10 I believe) and verifying the correct electrical polarity before installing the supplied connectors (Red to Yellow on Explorers!)
<br>The fogs line up with the Evo's perfectly, easily illuminating the darkest paths. The are exceptionally strong performers in illuminating lane marker in wet conditions and even though they are cooler in color than fogs typically should be, they cut through fog very well. I have them set about 1" below level at 50", a little higher than some would advise, but they help illuminate corners that way.
<br>Strongly recommended for any of the Fords listed!