E55-R: With the W211 E-class replaced, we just couldn't let this classic shroud design go. This design is inspired by the Mercedes Benz E55 AMG. A combination of smooth chrome surfaces coupled with a textured face make this shroud simple and attractive. Call it minimalist, we call it just right!
In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.
A or B: At The Retrofit Source, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a "B stock" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the "A Stock" Shrouds.
Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.
LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XSB 3.0 LED (switchback) and XBT LED (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below.
Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
SHROUDS: 2x E55-R
CENTRIC RINGS: Optional
LED HALOS: Optional
WARRANTY: 5 Years
SWAG: Morimoto Decal
FRONT HALO SIZE: 80mm
FINISH: Forever Finish Chrome
I bought these for my retrofit; compared to Gatling guns, they aren't very deep and are for larger headlights that aren't very recessed. I had to do a lot of cutting to fit them into my small headlights, but they turned out great!
I purchased B stock and they were in perfect condition.
The shrouds has a built in Halo effect created from the light off the lenses.