Vehicle-Specific LED Projector Fog Lights
Dodge Ram (Horizontal): Morimoto XB LEDB-FOG-RAMHOR
[ In Stock: pieces ]
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Dodge, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. Check out this step-by-step Installation Video from the Ram specialists at RetroShop and this Third Party Review from the guys at Headlight Revolution!
Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations. For a comparison video to stock, check out This Video that shows the two side by side.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
FOG LIGHTS: 2x Type Ram Morimoto XB LED
BEZELS: 2x Exterior-Grade ABS Plastic
OPTIONAL RESISTORS: 4x (Required for proper function)
WIRING: Plug-n-Play Connection Kit
OPTIONAL: Lamin-X Yellow Film Kit
WARRANTY: 10 Years
REPLACES MOPAR PART #: 55372735AB, 55372734AB, 55372735AA, 55372734AA
RAM 1500: 2009-2012
RAM 2500: 2010-2017
RAM 3500: 2010-2017
CERTIFICATIONS: DOT, ECE, SAE
INPUT SOCKET: Sealed 9006 Male
WEATHER RATING: IP67 Waterproof
LENS MATERIAL: High Impact Polycarb (UV-Resistant)
SHELL / HEAT SINK: Powder Coated Cast Aluminum
LIGHT SOURCE: 3x Philips Luxeon-T
LED OPTICS: Kuria Fog-Projection Lens
INTENSITY: 1,200lm (raw; each)
COLOR: 5500K (Pure White)
Anthony Reviewed: 4/28/2020 11:55 pm
Light output is amazing and it is just looks a thousand times better than the stock foglights. I have a 2015 Ram 2500 so I had to install the resistors, so this kit is not a true plug and play as you do have to mount the resistors. I had to buy self-tapping screws from the hardware store and the kit doesn't come with any sort of directions for resistor install. I recommend mounting them on the fog light bracket when you have it out of the truck as it's easier to drill and mount the resistor packs, I wouldn't trust these ziptied as they can get extremely hot. I'd give these fog lights a 5/5 but due to no directions for mounting the resistors that's why I give it a 4/5.
Steven Criss Reviewed: 12/10/2017 11:02:51 pm
Just installed these on my '14 Ram Laramie 2500 and couldn't be happier. Quality and light output are outstanding and the install was simple taking me about 30 minutes. These look much better than the factory fogs and perform much better as well. Color matches perfectly with my Morimoto 5500k HIDs in my low beams. I will post pictures as soon as I figure out how. Thanks TRS!
DONALD BALACH Reviewed: 12/27/2017 7:42:20 pm
Easy replacement. Nice fitment. Disappointed in light output. Not as bright as I thought they would be?
kevin Reviewed: 9/9/2016 2:26:14 am
very bright, decent cutoff i'd compare the cutoff to Fresnel Acura projectors. would have been 5 stars if they had a clear lens like the oem fogs but thats user preference. solid mount doesn't shake when going over bumps. would buy again in a heart beat, thanks TRS