Like: The Mini D2S 3.0 that became so popular for its stellar performance, the new 4TL-R Bi-xenon is based upon the same architecture, but scaled down in size and given new mounting points for direct-use in place of many modern OEM projectors!
Why TL-R? Simple, the mounting points are based on the same bolt pattern as the 4G Acura TL low beam xenon projectors that many Japanese cars use from the factory like the new Accord, Acura TL, Toyota Sienna, and Honda Odyssey! Gotta love being able to open your housing, unbolt your old weak projector, and swap in something that performs 10x better (and has a bi-xenon high beam!)
Performance: They produce a very wide beam pattern with a perfect distribution of light and top it off with a supremely sharp cutoff that will blow your mind. We're gonna go ahead and say not many projectors will out-shine the 4TL-R. Even with a clear lens swap and an experienced hand, you would be hard-pressed to tune your OEM 4G TL low beam projectors to even come close performance-wise!
High-end: As a relative to Morimoto's Mini D2S, the 4TL-R shares the same precision! The castings, the materials used for the bi-xenon mechanism and it's moving parts, to the the finishes applied from front to back are the market's demanded all along: OEM quality in an aftermarket setting.
But wait, there's more!: the 4TL-R isn't just good for OEM+ swaps. This is one of the best performing small bi-xenon projectors on the market today, and with their small 2.5" lens and convenient mounting points - you can custom retrofit these into almost anything and reap the rewards!
Trusted: For more than a decade, we've worked hard to earn our reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
PROJECTORS: 2x Morimoto 4TL-R Bi-Xenon
BULB HOLDERS: 2x D2S Twist-On
SOLENOID INPUTS: 2x 9006 Pigtails
WARRANTY: 3 Years
SWAG: Morimoto Sticker
APPLICATIONS: Universal or Direct-Retrofit
DIRECT FITMENT: For OE "Acura 4G TL Low Beam" Projectors (requires spacing)
BULBS: D2S HID Only
SHROUDS: All Styles Except Mini Gatling/Graphite
NOTE: Requires spacing to fit in place of OEM 4G TL projectors<
LENS DIAMETER: 2.5"
STANDARD LENS: 100% clarity "Kuria Optic" glass
So my install notes are as follows *assuming you can get the headlights off of the car, and disassembled*
the 4TL-R projectors bi-xenon plug interferes with the 4th gen TL projector mounting. a small 1/4" x 1/4" chunk needs to be removed from the lower portion of the mounting bracket. there are two dimple guides. the dimple that is in the way of the plug needs to be removed (dremmel w/ cutoff wheel)
once that is removed, the projector required .0250" spacers for the bottom, and a .0340" spacer for the top screw (your results may vary slightly). this keeps the high-beam in line with the projector.
I recommend installing the D2s bulb at this time as well, because it will be a PITA to install the bulb once the lenses are back on. I ran the bi-xenon wiring harness down thru the ballast hole.
I have replaced the halogen projector with this Morimoto 4TL-R for my 2013 Honda Crosstour. Thanks for Jamielle for helping me choosing the right projector. It is a direct swap for my original projector.
As for the result, the light output is a lot better than the original halogen projector. I'm very happy with the purchased, and glad that I have made a right decission.
Thank you so much TRS, especially to Jamielle
This was my first retrofit. I have a 2010 Acura TL and wasn't too happy with my stock headlights. Was this an upgrade? I think I made a pretty good decision based on what I was looking for. Color, sharpness, light output, all are exceptionally great when describing these projectors.