ACME: Picked up the call from consumers who want a product that meets their expectations but aren't ready to break the bank. Their entry-level gear is the new industry standard that delivers real performance at the right price.
Basic: Every other shop selling these has some fancy way of describing the same thing, but take us from us, if it ain't a Morimoto, it is literally just that: the same thing. Whether you're shopping on eBay, or Amazon, if you're looking for a bi-xenon retrofit on a budget: ACME's standard version of the classic "Mini H1 Bi-xenon" projector is a good buy.
Beam Pattern: Producing a classic DOT-stepped cutoff and a decently sharp cutoff, for such an inexpensive projector the light output isn't half bad!
High / Low: Their push/pull bi-xenon mechanism creates both a low and high beam pattern when actuated. Although dated, ACME H1 Bi-xenons use the most modern version of the Push/Pull solenoid system found on earlier Morimoto projectors.
Easy Install: The ACME H1 Bi-xenon uses a 20mm threaded mounting shaft for easy retrofitting with a good quality Hex-shaped lock ring made of AL. Their 2.5" lenses and small body makes them ideal for use in a budget build for a motorcycle or any vehicle with a small headlight housing.
Direct: These projectors are factory-direct and do not receive the same level of QC that we've come to expect from other brands like Morimoto. However, they've got a good track record for little to no problems out of the box, and their pre-installed clear lens should give them a nice sharp and colorful cutoff line and and good output.
H1 Only: The ACME H1 projectors are designed for, you guessed it! H1 HID bulbs. Other bulbs will not seat properly or result in the proper light output, so pick yourself up a set to make sure you've got it all!
Trusted: For more than a decade, we've worked hard to earn our reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
PROJECTORS: 2x ACME Standard H1 Bi-xenons
HARDWARE: Basic mounting hardware / H1 bulb clips
WARRANTY: 6 Months
APPLICATIONS: Universal (cars/trucks/motorcycles)
DIRECT FITMENT: H4, H7 Headlights (little/no mods req'd)
MODIFICATION REQUIRED: H1,H11,H13,9005,9006,9007 housings
BULBS: H1 HID Only
SHROUDS: All Styles (w/ Centric Rings)
CENTRIC RINGS: Shrouds Require Mini H1 Model
FUNCTIONALITY: Low and High Beam (Bi-Xenon)
TRAFFIC PATTERN: LHD Only
COMPATIBLE WITH: 35w H1 HID Systems Only
DEPTH: 139mm (includes bulb holder)
LENS DIAMETER: 2.5"
MOUNTING SHAFT: 20mm Diameter
HOUSING DEPTH: 115mm Minimum
I've bought 2 sets of these for both of my cars. Install was super easy and straight forward. Light output is amazing compared to factory.
Bought these projectors for a little project I had, was thinking bout ordering morimotos mini h1 after I had gotten everything the way I wanted it, that was until I put everything in place and was surprised with these inexpensive projectors, gets the job done, I would highly recommend these if you're on a budget
Very good product for the price, good cut-off with rainbow effect. Would recommend if you're looking to do a retrofit project on a budget