Discerning: Automotive lighting geeks will certainly be impressed with the Morimoto Bi-xenon Stage IV Projector retrofit system. With standard equipment from Morimoto and options from some awesome OEM's like Denso and Philips...your headlights are going to be doing zero to full intensity in three seconds flat.
Projector-Perfection: There are other projectors that produce brighter hot spots. There are other projectors that have unholy amounts of width….But no other option creates the perfect balance of width & hotspot lux (aka distance) quite like the 5.0. In order to create the ultimate weapon for driving in the dark; Morimoto baked in all of the best practices from a variety of well-respected OEM and aftermarket projectors. Their latest and greatest equates to the perfect all-around perfomer. While it big boost in the performance department, it’s also clear they’ve paid attention to the details in the parts department too. New bulb holders & lock rings are icing on our projector pie!
Shrouds: Basically, they're the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
OEM Ballasts: From Matsushita or Denso, these have a virtually-instant warm up time, bringing the HID bulbs to their full intensity within 2-3 seconds. When waterproofed, these ballasts are virtually "bomb proof" by preventing moisture damage and enhancing their warranty coverage. Without waterproofing, they are susceptible to moisture ingress--something not covered by their warranty!
Philips 85122 D2S Bulbs: Are the benchmark for high quality 4300K HID lamps. With their extra long life span, unmatched precision, and high luminosity - they've been an OE benchmark for ten years. These days, you can upgrade to the super Osram CBI or NightBreaker bulbs for even more luminosity and white light. If you've got the money, go for it! We take pride in being one of the few retailers that only sells genuine OEM products.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.
Optional Canbus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.
Optional LED Halos: Though LED halos may not be for everybody, if you’re looking for the cleanest, most simple, most reliable setup, we highly recommend the Profile Performance Pivot Halos. Not only are they the brightest, most uniformly lit halos currently on the market, but they double as a switchback turn signal with your blinker circuit. The integrated controllers are extremely easy to setup with only three wires (white, amber, and ground) and allow you to run the white mode continuously until interrupted by the signal – at which point they will blink amber. Once the signal stops, the Pivot ring will automatically switch back to its pure white mode.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn’t prevent their new headlights from fogging up is beyond us. It’ll be the best twelve bucks you’ve ever spent.
Trusted: For more than a decade, we've worked hard to earn our reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive lighting products at the best prices and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
SHROUDS: 2x Your Preference
D2S HID BULBS: 2x Philips or Osram
WIRE HARNESS: 1x Your Preference
WARRANTY: 3 Years (excluding moisture damage)
OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber
OPTIONAL LED HALOS: 2x Profile Pivot
APPLICATIONS: Universal / Size Allowing
CAPABILITIES: Both Low & High Beam
PROJECTOR DIMENSIONS: Varies by Model
PROJECTOR LENS: Varies by Model
MOUNTING SHAFT: 35mm (for MD2S. N/A for FX-R)
MINIMUM HOUSING DEPTH: 117mm (for Mini D2S)
WIRE HARNESS: Match your original bulb size
SHROUDS: All styles except "Mini" models
LED HALOS: Varies according to shroud style
OPERATING RANGE: -40C to +125C
OE BALLAST INPUT: 12VDC
OE BALLAST OUTPUT: 85V AC
OE BALLAST MAX V: 25kV (at start-up)
OE BALLAST LIFESPAN: 2000 Hours
OE 4300K BULBS: Warm White Color
OE 5500K BULBS: Pure White Color
LUMINOSITY: 3200-3500lm total (depends on bulbs)
You have a lot of chooses on life, but it should be an easy one to buy from TRS.
I ordered this stage 4 kit and could not be happier.
The FXR (3 inch lens) is fantastic and easy to install. The Denso slim ballest is easy to mount and has your bulbs fully ignited in less then 5 seconds. The PHILIPS 85122+ bulbs are amazing at lighting up the road ahead. The Panamera Shrouds fit over the projector like a glove. I'd buy this setup again any day.
Most importantly when I needed help or had a question, TRS was more then happy to help and tech me what I needed to know.