Morimoto

Mopar Bi-Xenon: Morimoto Elite


$0.00

10 or more

$0.00

Wholesale

$0.00

MSRP

+
Add to Cart

Product Details

Renowned: The Morimoto Elite Systems have earned their reputation amongst many as the aftermarket's best set of HID's. We urge you to check out the specs below, Read the Reviews and then ask yourself whether your ability to see well while driving at night is worth saving a couple bucks?

NOTE: If you have a 2015+ Mopar vehicle, the correct kit can be seen here: 2015+ Mopar-Spec Elite Kit

Optioned Out: With a variety of available options, the Morimoto Elite HID system can be configured perfectly just for you. This helpful video goes over each of the options shown above.

HID Ballasts: The all new XB ballasts feature relocated igniters like OEM units, putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up. (not to mention they're damn good looking!)

HID Bulbs: The Morimoto HID bulbs feature ceramic bases for precise alignment giving you a clean beam pattern. Quartz glass tubes to minimize UV output and maximize luminosity. Their Praxair (US) metal halide salts produce very accurate color temperatures in the 4K, 5K, and 6K range.

Wiring: The specialMopar Spec Bi-xenon Harness features an all-new weather-pack extruded aluminum relay, 14 gauge stranded copper wire wrapped in durable black tech-flex mesh that looks like a factory harness once installed. No cutting or splicing here: all connections are plug-n-play. Most importantly, the harness includes the proper resistors and capacitor to absorb and smooth out the pulsed signal from the factory headlight circuit that plagues these trucks.

Backed Up: Let's not forget the 5-year warranty on the entire kit*. The Elite system is designed to run for 2500 hours, so that's what it's guaranteed for. Don't buy into empty promises from other places offering BS "lifetime" warranties. Nothing lasts forever, and if you think "the other guy" will be there to pick up the phone or even stay in business long enough to assist you when there's a problem; guess again! [*XB55 Mopar HID kits have a 3 year warranty]

User-Approved: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5,6) that span several generations of the Elite HID systems! If you haven’t made a decision just yet, keep reading!

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us

Product Specs

  • Tech Specs

  • BALLAST INPUT: 9-32V DC

  • BALLAST OUTPUT: 85V AC 35W or 50W

  • BALLAST MAX. V: 25kV (at start-up)

  • SYSTEM OPERATING RANGE: -40C to +125C

  • 35w RATED LIFESPAN: 2,500 hours

  • 50w RATED LIFESPAN: 2,000 hours

  • 3000K BULBS: Golden Yellow ~2800lm (each)

  • 4500K BULBS: Warm White ~3500lm (each)

  • 5500K BULBS: Pure White ~3400lm (each)

  • 6500K BULBS : Cool White ~3200lm (each)

  • 50W BALLASTS: (+20% intensity) (-20% lifespan)(-1000K color)

In Action

Product Reviews

5 out of 5 stars

Mopar Bi-Xenon H13 2011 Ram 1500

JEFFREY Reviewed: 03.21.2015

The stock halogens on the Dual H13 headlights on my 2011 Dodge Ram 1500 were so bad that I would have to turn on the high beams to even tell if they were on! After much research I went with The Retrofit Source Mopar Bi-Xenon H13 Kit. I made multiple calls for questions before and after my purchase and have to say their support is excellent. I never waited more than one minute for a real person to answer my questions. Installing the bulbs and making the connections are quick, but locating the module, resistors, and grounds is more time consuming. The resistors get really hot and it is my opinion that you don't want them anywhere near plastic or main wiring looms. After much trial and error I settled on the horizontal bar between the transmission cooler and the ac/radiator. I saw a post on the net that used the same location. I was told by the techs that the resistors can be exposed to the elements. This location puts them with good air flow with no temperature sensitive plastic or wiring nearby. There is a small lip in the center of the bar, so to allow them to lie flat, I used 1/8 aluminum pop rivets. I used two thick spacers below resistors to allow them to lie flat and one one top to keep the rivet from pulling through. This bar is electrically isolated from the ground so i tapped a 12-24 terminal screw in the bar and used a 12 gauge tinned marine wire with heat shrink ring terminals to connect it to the large ground terminal near the battery. I painted the resistors with high temperature flat black paint so the don't show through the grill. The harness hot lead was easily connected to the positive accessory terminal on the fuse box. The ground for the ballast easily reached the same negative terminal that the resistors went to near the fuse box and fender. I used 3M super double sided tape to attach the ballasts to the vertical frame supports near the headlights. There is no way to easily screw them in. I drilled and tapped another ground terminal on that same support for the passenger ballast ground. I honestly spent the better part of a day with the install but it was definitely worth it. The improvement turned night into day. The visibility is remarkable. I was concerned about glare to on coming cars since I didn't use projectors. But after using them for a couple of times on very dark roads, I have never had a single car flash at me. The improvement in lighting is superb!!! I am extremely pleased with their service and would recommend this kit to anyone with a Dodge Ram 1500.


5 out of 5 stars

bixenon for mini countryman

Mike Reviewed: 02.26.2014

Installed these lights on my 2011 Countryman . Worked as soon as I plugged them in. But noticed light malfunction Warnjng on my dash. I called customer service and they were able to troubleshoot it over the phone. 2 added resistors we're sent to me free of charge. After adding them to the system the warnings stopped. TRS has great customer service and good quality products. Will be back for more lighting.