Bi-Xenon: Morimoto Mini D2S 4.0


Product Details

Last of the great fourth: Head to head with any OEM projector, the quality is spot on, but the Morimoto Mini D2S 4.0 is: 1) So much easier to retrofit with their extra long mounting shaft and 2) So much brighter. They actually failed to pass FMVSS108 testing only because the measured lux at certain points throughout their beam pattern exceeded the maximum allowed! With 4th generation Mini D2S optics powering across their curved cutoff shield and through the standard Kuria Optic clear lens, the Mini D2S 4.0 is a force to be reckoned with. Razor Sharp, unbeatable width, perfectly distributed gradient of light down to the foreground, and a high beam that’ll put some off road LED bars to shame.

Installation Summary: On a H4-based headlight reflector for example...Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! Check out the installation procedure linked above.

Overview Video: Check out this helpful video to see how easy Mini D2S projectors are to install!

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us

Product Specs

  • What's Included

  • PROJECTORS: 2x Morimoto Mini D2S 4.0 Bi-xenon

  • LOCK RINGS: 2x Aluminum Hex-Shape

  • SOLENOID INPUTS: 2x 9006 Male Pigtails

  • WARRANTY: DOA ONLY

  • Compatibility

  • APPLICATIONS: Universal (cars/trucks/motorcycles)

  • DIRECT FITMENT: H4 Headlights (little/no mods required)

  • MODS REQUIRED: H1,H7,H11,H13,9005,9006,9007 housings

  • OUTPUTS: Low and High Beam

  • UNITED STATES: LHD (Left Hand Drive)

  • AU, UK, JAPAN: RHD (Right Hand Drive)

  • BULBS: D2S/D2H HID Only

  • HID SYSTEMS: 35w and 55w

  • SHROUDS: All Styles Except Mini Gatling/Graphite

  • CENTRIC RINGS: Not Required

  • CERTIFICATIONS: Exceeds DOT requirements

  • Tech Specs

  • HEIGHT: 85mm

  • WIDTH: 101mm

  • DEPTH: 142mm

  • MOUNTING SHAFT: Diameter = 35mm

  • LOCK NUT: CNC Aluminum

  • HOUSING DEPTH: 117mm Minimum

  • STANDARD LENS: Kuria Optic

In Action

Product Reviews

Also Purchased