Easy Install HID Projectors
Bi-Xenon: ACME Super (H1)B-PRJ-ACSUPH1
[ In Stock: pieces ]
Starting at $X.XX/month with
ACME: Picked up the call from consumers who want a product that meets their expectations but aren't ready to break the bank. Their entry-level gear is the new industry standard that delivers real performance at the right price.
A Step Above Basic: A step above standard, these "Super Mini H1" projectors are about equal to the 5th gen Morimoto Mini H1. The "Super Mini H1" is the industry standard for high quality, but still pretty "basic" of all of the Mini H1 projector varieties. The Supers are produced with a bit more quality control in mind relative to the "standard" Mini H1's out there. The components in the ACME Super H1s are made with better precision meaning: less sticky solenoids, a sharper and more colorful cutoff line, less chance of a stripped lock ring, and overall...more light on the road!
Beam Pattern: Producing a classic DOT-stepped cutoff and a decently sharp cutoff, for such an inexpensive projector the light output isn't half bad!
Dual Function: The push/pull bi-xenon mechanism of this bi-xenon projector retrofit creates both patterns. Although dated, ACME Super H1 bi-xenons use the most modern version of the Push/Pull solenoid system found on earlier Morimoto projectors.
Easy Install: The ACME Super H1 Bi-xenon uses a 20mm threaded mounting shaft for easy retrofitting with a good quality Hex-shaped lock ring made of AL. Their 2.5" lenses and small body makes this bi-xenon projector retrofit ideal for use in a budget build for a motorcycle or any vehicle with a small Fog Light housing.
Direct: These projectors are factory-direct and do not receive the same level of QC that we've come to expect from other brands like Morimoto. However, the ACME Super H1s got a good track record for little to no problems out of the box, and their pre-installed clear lens should give them a nice sharp and colorful cutoff line and good output.
H1 Only: The ACME Super H1 projectors are designed for, you guessed it! H1 HID bulbs. Other bulbs will not seat properly or result in the proper light output, so pick yourself up a set to make sure you've got it all!
Optional Precision Bulb Holders: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. Well worth the extra few bucks in the grand scheme of things!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!
PROJECTORS: 2x ACME Super H1 Bi-Xenons
HARDWARE: Basic mounting hardware / H1 bulb clips
OPTIONAL PRECISION BULB HOLDERS: Morimoto MotoHo1ders
WARRANTY: 6 Months
APPLICATIONS: Universal (cars/trucks/motorcycles)
DIRECT FITMENT: H4, H7 Fog Lights (little/no mods req'd)
MODIFICATION REQUIRED: H1,H11,H13,9005,9006,9007 housings
BULBS: H1 HID Only
SHROUDS: All Styles (w/ Centric Rings)
CENTRIC RINGS: Shrouds Require Mini H1 Model
APPLICATION: HID and LED projectors are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE Note: This usage regulation is not unique to ACME projectors. All LED and HID projectors from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, CLICK HERE
HOMOLOGATION ECE: NO
DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
TRAFFIC PATTERNS: LHD Only
COMPATIBLE WITH: 35w H1 HID Systems Only
DEPTH: 139mm (includes bulb holder)
LENS DIAMETER: 2.5in
MOUNTING SHAFT: 20mm Diameter
HOUSING DEPTH: 115mm Minimum
Best bang for your buck.
Taylor LaMont Reviewed: 4/7/2017 12:32:20 am
I bought these to do a budget build on a Triumph Daytona. Light output is good but not the best. The cutoff is really sharp and has a nice color to it. Overall really happy with these projectors!
Great projectors for the on the budget DIYers
Kenny Man Reviewed: 4/10/2018 4:14:03 am
Great projectors for the DIY entry level retrofitters without breaking the bank. Start with these for the beginner then once you get to know how on retrofitting you can buy other projectors for your next pair of retrofitted headlights.