Swap-In Projectors

Bi-xenon: Morimoto 4TL-R

B-PRJ-4TLR-TRS

PART #: 2 x PR120


[ In Stock: 0 pieces ]

FREE SHIPPING
RETURNS
DIRECT
EXPERTISE
ENTHUSIASTS
REPUTATION

Product Details

Like: The Mini D2S 3.0 that became so popular for its stellar performance, the new 4TL-R Bi-xenon is based upon the same architecture, but scaled down in size and given new mounting points for direct-use in place of many modern OEM projectors!

Why TL-R? Simple, the mounting points are based on the same bolt pattern as the 4G Acura TL xenon projectors that many Japanese cars use from the factory like the new Accord, Acura TL, Toyota Sienna, and Honda Odyssey! Gotta love being able to open your housing, unbolt your old weak projector, and swap in something that performs 10x better!

Performance: They produce a very wide beam pattern with a perfect distribution of light and top it off with a supremely sharp cutoff that will blow your mind. We're gonna go ahead and say not many projectors will out-shine the 4TL-R. Even with a clear lens swap and an experienced hand, you would be hard-pressed to tune your OEM 4G TL projectors to even come close performance-wise!

High-end: As a relative to Morimoto's Mini D2S, the 4TL-R shares the same precision! The castings, the materials used for the bi-xenon mechanism and it's moving parts, to the the finishes applied from front to back are the market's demanded all along: OEM quality in an aftermarket setting.

But wait, there's more!: the 4TL-R isn't just good for OEM+ swaps. This is one of the best performing small bi-xenon projectors on the market today, and with their small 2.5" lens and convenient mounting points - you can custom retrofit these into almost anything and reap the rewards!

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!

Product Specs

  • What's Included

  • PROJECTORS: 2x Morimoto 4TL-R Bi-Xenon

  • BULB HOLDERS: 2x D2S Twist-On

  • SOLENOID INPUTS: 2x 9006 Pigtails

  • WARRANTY: 3 Years

  • Compatibility

  • APPLICATIONS: Universal or Direct-Retrofit

  • DIRECT FITMENT: For OE "Acura 4G TL Low Beam" Projectors (requires spacing)

  • BULBS: D2S HID Only

  • SHROUDS: All Styles Except Mini Gatling/Graphite (REQUIRES 'OEM' 2.5in CENTRIC RINGS)

  • APPLICATION: HID and LED projectors are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE Note: This usage regulation is not unique to Morimoto projectors. All LED and HID projectors from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, CLICK HERE

  • HOMOLOGATION ECE: NO

  • DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)

  • Tech Specs

  • NOTE: Requires spacing to fit in place of OEM 4G TL projectors

  • HEIGHT: 85mm

  • WIDTH: 105mm

  • DEPTH: 130mm

  • LENS DIAMETER: 2.5in

  • STANDARD LENS: 100% clarity 'Kuria Optic' glass

Product Reviews

5 out of 5 stars

7 Reviews   Write a Review

5 out of 5 stars

2009 TL install notes

Charles Haluska

So my install notes are as follows *assuming you can get the headlights off of the car, and disassembled*



the 4TL-R projectors bi-xenon plug interferes with the 4th gen TL projector mounting. a small 1/4" x 1/4" chunk needs to be removed from the lower portion of the mounting bracket. there are two dimple guides. the dimple that is in the way of the plug needs to be removed (dremmel w/ cutoff wheel)



once that is removed, the projector required .0250" spacers for the bottom, and a .0340" spacer for the top screw (your results may vary slightly). this keeps the high-beam in line with the projector.



I recommend installing the D2s bulb at this time as well, because it will be a PITA to install the bulb once the lenses are back on. I ran the bi-xenon wiring harness down thru the ballast hole.


5 out of 5 stars

A Must Have Upgraded for your Honda Crosstour

Phi

I have replaced the halogen projector with this Morimoto 4TL-R for my 2013 Honda Crosstour. Thanks for Jamielle for helping me choosing the right projector. It is a direct swap for my original projector.

As for the result, the light output is a lot better than the original halogen projector. I'm very happy with the purchased, and glad that I have made a right decission.

Thank you so much TRS, especially to Jamielle


5 out of 5 stars

Great quality/performance

Oscar Tello

Semi easy to retro into hondas/acuras that has factory projectors and you want that upgrade. Nice and wide with a clear sharp cut off. The color flicker is between purple/violet to blue. I like the performance of these projectors.


5 out of 5 stars

Great quality/performance

Oscar Tello

Using these for my Acura TSX, great upgrade, easy to retrofit with small modifications for mounting. Using them for a very long time on a daily usage with 50 watts morimoto ballast and XB35 D2S. Nice even output, clear cut off, violet to blue flicker very nice color flickers and very bright, beam is wide enough to light up 4 lanes of freeway.


5 out of 5 stars

Plenty of light in a small package

Derek Fowler

I installed these in my 92 gmc sierra. By far the best decision I could have made. Obviously the cut off isn't quite as good as the d2s 4.0 but if you need a good quality projector in a cramped space but still want 50w hids, this is the way to go! The cutoff is better than I assumed it would be and you really can't beat the price.


5 out of 5 stars

Perfect for Mazda 3 BM 2013 - 2017

Christian Herz

This Projector fits great in the new Mazda Headlights! Its easy to install and works great :-) !Thanks to TRS!


5 out of 5 stars

Pretty dope!

Lamar

This was my first retrofit. I have a 2010 Acura TL and wasn't too happy with my stock headlights. Was this an upgrade? I think I made a pretty good decision based on what I was looking for. Color, sharpness, light output, all are exceptionally great when describing these projectors.