DESCRIPTION
FEATURES & BENEFITS
- Powerful Visibility: Three 5500K LEDs per side deliver 2400 lumens for excellent fog visibility.
- Easy Install: Compatible with Chevrolet models, plug-and-play design simplifies installation.
- Durable Build: Robust polycarbonate lens and aluminum housing ensure longevity and protection.
- Safety Compliant: Meets SAE, DOT, and ECE standards for safety and compliance.
- Precise Aiming: Integrated height adjusters for accurate fog light placement.
WHAT’S INCLUDED
Fog Lights: 2x (One Pair) Morimoto XB LED Type S5 Fog Lights
Bezels: 2x Exterior Grade ABS Plastic Bezels
Wiring: Plug and Play Harness
Optional: Yellow Lamin-X Film Kit
WARRANTY INFORMATION
TECHNICAL SPECIFICATIONS
Intensity: 1,200lm (Raw; each)
Input: H11 Male
Material: Powdercoated Aluminum (Housing), UV-Resistant Polycarbonate (Lens)
Light Source: Nichia 5500K (Pure White)
LINE DRAWINGS
COMPATIBILITY
Audi A4/S4 (Quattro only): 2009-2011
Audi A5/S5 (Quattro only): 2008-2011
Audi A5/S5 Cabriolet: 2010-2012
Audi A6: 2012-2016
Audi Q3: 2015-2017
Volkswagen CC: 2009-2012
Replaces VW Part #: VW2592115, VW2593115, 8T0941699E, 8T0941700 E
COMPLIANCE
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto Audi fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Audi, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The Morimoto XB LED fog light kit is designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.
Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Ratings & Reviews
2 reviews
These Look AWESOME
by Dean
Really like the appearance! They fit within the cutouts of my fog lamp grilles perfectly and look very sharp.
A few things to note though:
- In the box there is a tiny piece of paper that says to go to Morimoto's website to get install instructions. There are no instructions on Morimoto's (or TRS') site.
- For some reason, these come with bare wires attached to the lamps with the electrical connectors separate - you have to install the spades into the connectors. Again, there's no instructions on how to do this.
- Morimoto/TRS list these as "S5 type"; I'm not sure what that even means. They also have compatibility all wrong as these will fit any B8 (not B8.5) A or S 4 or 5, which means they are compatible with cars from 2008 - 2012, not 2011.
- The built in leveling screw is not accessible with the lamp installed. You have to install it, decide where to adjust, then uninstall and make the adjustment.
Easy to install and look great!
by Dave
These were easy to swap out with the stock housings. The light output is much higher and cleaner! The cutoff keeps the light where it should be. Would recommend these!