Vehicle Specific LED Projector Fog Lights
Audi (B6/B7 Type): Morimoto XB LEDB-FOG-AUDI2-TRS
[ In Stock: 0 pieces ]
Starting at $X.XX/month with
No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto Audi fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.
Compatible: With many modern applications from Audi, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.
Plug n Play: Wiring is easy too! The Morimoto XB LED fog light kit is designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. Check out this step-by-step Installation Video from the Ram specialists at RetroShop!
Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations. For a comparison video to stock, check out This Video that shows the two side by side.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!
Word on the Street: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!
Overview Video: Prefer videos? Check out this helpful video the lineup of XB LED fogs!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
Fog Lights: 2x (One Pair) Morimoto XB LED Type B6/B7 Fog Lights
Bezels: 2x Exterior Grade ABS Plastic Bezels
Wiring: Plug and Play Harness
Optional: Yellow Lamin-X Film Kit
Warranty:10 Years (Click for Details)
Audi A4 B6: 2000-2004
Audi A4 B6 Avant: 2001-2004
Audi A4 B6/B7 Cabriolet: 2002-2009
Audi A4 B7: 2004-2007
Audi A4 B7 Avant: 2004-2007
VOLVO C30: 2007-2013
VOLVO S40: 2004-2012
Replaces VW Part #: 8E0941699B, 8E0941700B
Replaces Volvo Part #: 30698627, 31213175, 8648094, 30698628, 31213176, 8648095
Compliance: DOT, ECE, SAE Standards
NOTE: MAY FIT OTHER VW APPLICATIONS. CHECK GEOMETRY OF YOUR FOG LIGHTS.
Intensity: 1,200lm (raw; each)
Input: H11 Male
Material: Powdercoated Aluminum (Housing), UV-Resistant Polycarbonate (Lens)
Optic: Kuria Fog-Projection Lens
Light Source: Nichia 5500K (Pure White)
Great fitment and light output but without flaw
These fit right up and look great, and really good light output and cut off. You do need the CANBUS error cancelers or else you will get a bulb out light. The biggest flaw with these are the lens placement. They are recessed in and allow alot of bugs and dirt to get lodged in and take some time to clean. In the snow they fill up so you have 0 output because of how much snow gets packed it. If the lens was on the outside like the OEM's, theyd be a 5 star.