Apollo 2.0: launches with clean lines, smooth contours, and a design that works really well with our amazingly bright 110mm LED halos. Bring the exotic design from modern Porsche headlights home with these fresh shrouds. The Apollo 2.0's have a beautiful smooth chrome finish that is accented by textured face for a unique and attractive look.
In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.
A or B: At The Retrofit Source, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a "B stock" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the "A Stock" Shrouds.
Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.
LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.
Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
SHROUDS: 2x Apollo 2.0
CENTRIC RINGS: Optional
LED HALOS: Optional
WARRANTY: 5 Years
SWAG: Morimoto Decal
HEIGHT: 110mm (flat), 132mm (round)
FRONT HALO SIZE: 80mm
VENT HALO SIZE: 110mm
FINISH: Forever Finish Chrome
These have been the perfect size for a custom, cut-to-fit application on a few of my builds and I just love the way these look. definitely my all-time favorite shroud!
Love the smooth lines and the smooth look. fit very well on the mini h1 6.0. Fit very well in my Nissan Titan low beam. Quality is very high even with my "B stock" apollo 2.0
Love the look and it's perfect for big projectors like the S2k projector I used in my retro. The 100mm xB LED ring is a little small for mounting on the inside, but it still works and looks fine, you just have to be careful when mounting it that you see it around the whole perimeter of the shroud.
Overall really happy with this shroud.
If you plan on installing leds on the inside the 110mm are too big the 100mm are too small they need a 105mm?
Apollo 2.0 shrouds look ideally. The only reason for 4 stars is wrong description for external halo size. Actual external halo diameter is 80 mm.
Although these shrouds are very large, they cover a lot of space which was perfect for my TL projectors. I also mounted the 100mm XBA inside and the 90mm for the turn turn signal on the exterior for a truly unique look. Personally I think that there is enough room to fit the 110mm XBA, because the 100mm has a lot of room. A bigger halo would fit better I think. Overall these things are awesome! No one better than TRS!