Plug-n-Play Bi-LED Housings
Chevrolet Camaro (16-18): XB LED HeadlightsB-ASY-LF403-TRS
Save 15% while supplies last on these lights with promo code! (Click Here For Details)
[ In Stock: 0 pieces ]
No Substitutes: Yeah the HID headlights that came on the Camaros perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the Camaro Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.
Performance: We've always been blown away by the fact that even though the Camaro came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's Camaro headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup.
DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.
Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your Camaro without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.
Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.
Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Camaro's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
Headlights: 2x (One Pair) 16-18 Camaro XB LED Headlights
Wiring: Plug and Play Harness, Fuse Tap, DRL Modules
Warranty:5 Years (Click for Details)
Chevrolet Camaro: 2016-2018
Replaces GM Part #: 84078850, 84078851
Compliance: DOT, SAE, FMVSS108 Standards
NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.
Intensity: 2,600lm (raw; each)
Traffic Pattern: LHD Only
Input: GM Multi-Pin OEM
Bezel Color: Gloss Black
Functions: DRL (White), Parking, Low, High
Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Optic: Kuria Optic BI-LED
UV Coating: Momentive UVHC3000
Good looking and Bright replacemrnts
Headlight looks great, especially compared to the stock HID bulb. Mounting is a bit difficult, I suggest starting with the bottom screw and ending with the top screw closest to the fenders. I had to slightly push on my housing to line the holes up.
Great Replacement Headights
The headlights look great, and are super bright (especially compared to the factory HID light output). Of course install is a pain since you have to takeoff the bumper to get to two of the mounting holes. When installing you will want to only thread the first couple of screws in just enough to hold the light up in place. You will have to work the headlight to get all of the mounting holes to line up right. You can either elongate the holes, or put just enough pressure to line it up without breaking the mounting tabs. I suggest starting with the bottom screw and ending with the top screw nearest to the fenders.
2017 Camaro 2SS: Overall looks are a 9/10. Overall fitment is a 9/10. Some of the mounting holes were extremely tight when lining up to the screw holes on the car, but overall they fit without breaking anything. The low beam has a nice color and beam spread. The brights are fantastic and the amber blinkers are intensely bright. However, the eyebrow DRL does not work in unison with the OEM bumper DRLS during the day. They cannot be bright at the same time during daytime driving, so you have to turn your bumper DRLs off to have the eyebrow bright, or put your parking lights on to make them both dim. In "auto", the bumper DRL is much brighter than the Morimoto eyebrow. That is a very disappointing aspect of these lights. At night or when the headlights are on, the eyebrow and bumper DRL are both dim and looks great together.