Extend: some extra length to the outputs of your harness for your HID Ballasts or high beam solenoids with these 9006 Male > 9006 Female extension cords.
Oversized: If you're retrofitting a big truck or mounting your ballasts in an unconventional space - a universally sized relay harness may not have the length you need. Here is the answer.
Universal: 9006 Male inputs to 9006 Female outputs with 12 inches (30cm) of 14 gauge wire in between, then protected in a heat-resistant TechFlex mesh for an factory-look.
Sealed: metal pins with rubber grommets on both ends ensures the longevity by keeping moisture out of the connections.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
CABLES: 2x 9006 Male to 9006 Female Extensions
WARRANTY: 2 Years
SWAG: Morimoto Decal
HARNESSES: All Morimoto Harnesses
BALLASTS: All with 9006 Male Inputs
HALOGEN BULBS: Compatible up to 55W
WIRE THICKNESS: 14 AWG
LENGTH: Approx. 12in / 300mm
INSULATION: Braided TechFlex
INPUT: 9006 Universal Female
OUTPUT: 9006 Universal Male
Well sealed on the back of the connector where the wires enter. The ends seat firmly and seal well, contacts look good and the extra wire length is nice. I have cut these in half to use male and female connectors to build a harness for a set of off road lights that id like to be able to unplug in the event of damage. The harness that came with the lights does not allow for that as the lights must be crimped or soldered to the harness. This harness is perfect for my application and is a solid product.