Custom Wiring Parts
4-Pin LED Strip Harness (RGB)X.ACC.HAR.FLEX4
[ In Stock: pieces ]
Starting at $X.XX/month with
Sold in Pairs, total of 4 clips
Each harness has 2 clips, can be used to join LED strips or cut the harness in half to make a pigtail.
When using the flexible LED strips that come in 5 meter rolls, sometimes you have to cut it to length and to attach the cut side to a power source requires soldering onto the circuit board. Now, there is a quick connection available to make your install much easier!
This picture shows how to use the 2-pin connector to hook up to a flexible LED strip using single-color LED chips. There are two styles of clips, the single-color style and the RGB style. The single color style has 2 wires, the RGB style has 4 wires.
- Cut the LED strip to the length you want.
- Peel away the soft silicone cover on the LED strip exposing the bare contacts.
- Line up the quick clip harness so the red wire contacts the positive side and the black wire contacts the negative side, of the LED strip.
- Press the quick clip harness together until it clicks. Test by applying 12v DC to the red and black wires.
Wire Length 6.5"
WIRE THICKNESS: 16ga
WIRE LENGTH: 7"