Stock Sucks: No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too!
Compatible: With all Non-BLIS F150s from 2015-2018, these complete tail light assemblies will swap directly in place of the original F150 tail lights, use all of the stock mounting points, and should only take around 30 minutes to install.
Plug n Play: Wiring is easy too! The XB LED tails are designed to work without any special wiring (for 15-17 trucks; 2018+ require the optional harness). They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!
NOTE: 2018+ F150s REQUIRE the optional harnesses, however these are still not compatible with OEM LED or OEM BLIS tail light-equipped trucks.
Style: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red.
Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your F150, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.
Overview Video: Check out this helpful video to see these tail lights installed and running!
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
TAIL LIGHTS: 2x 15-17 F150 XB LED
WIRING: Plug n Play connection kit (15-17)
2018 WIRING: Requires Optional Harness
WARRANTY: 5 Years
SWAG: Morimoto Decal
REPLACES FORD PART #: FL3Z-13405-A & FL3Z-13404-A
FORD F150/RAPTOR: 2015-2018 (Halogen only)
2018 TRUCKS: Optional Harness Required!
OEM BLIS / LED: Will not work
NOTE: Not compatible with non-US spec trucks
MEETS: DOT, SAE, FMVSS108 STANDARDS
INPUT SOCKET: Ford Multi-pin OEM
WEATHER RATING: IP67 Waterproof
LENS MATERIAL: High Impact Polycarb (UV-Resistant)
HOUSING: Injection molded ABS
LIGHT SOURCE: SSC LED (Red)
MODES: Turn/Brake (Dual Intensity)
I just installed my morimoto taillights I purchased months ago. Wow! These lights fit absolutely perfect. There are no gaps anywhere.. They look amazing ! I think a kid could install these, it’s so easy.
Just installed these two days ago when I got them and wow! They look good during the day but at night your F-150 will look nice. My dad said it made my truck look like a sexy space ship due to the Tuxedo Black paint and Smoked tail lights . Really impressed with my first Morimoto product and impressed with the brightness of their LEDs. I recommend these tail lights for the modern F-150 (15-18)
I just got these taillights for my f150! They are mind blowing! I can't believe how easy they were to install. It was as easy as one, two, three! These hold up there looks and they look like they will last a lifetime.
I was torn between the Morimoto LED and the Anzo Gen 2 tails for my 2017 F150. Stock really sucks, hands down. As I was researching, TRS was the only company i found that had done a youtube install of the Mori's. After watching the video, and seeing the final result of the tails in action, I was sold.
The processing and shipping was nose-bleed speed. I was hoping to have them before i went back to work after vacation, and I'll be danged if they weren't being processed to ship pretty much the same day i ordered them. Hats off to you, TRS. You'll def be getting my business again in the future.
I got these in today and while unboxing I was very impressed with how well put together they were, I thought they were as good, if not even a little better than OEM. I put them on the truck and stood back and got excited because they look so good.
Then I went to hook them up.... I guess I missed the part in the description about only working on non-blis. I was seriously bummed out, but they were very cool about taking them back. Here is hoping they come out with a set for those of us that have Blis, however, I suspect that they would be rather expensive since there is obviously something besides just light bulbs in the housing.