TRS Tech
Install Guides
Browse our PDF Install Guides for Projector Retrofits, HID Systems, Wiring, Accessories, Clear Lenses, and more!
Projector Retrofit Guides
A general guide on installing the Morimoto Mini D2S Bi-xenons into an H4 based headlight.
A general guide on installing the Morimoto Mini H1 Bi-xenons, demonstrated on a motorcycle with H7 headlights.
A general guide on retrofitting full size projectors that can be applied to everything from the shown FX-R's to TSX, TL, RX330, etc.
HID System Install Guides
A general guide on installing and wiring the bulbs, ballasts, and wire harness included with this kit. This system is also part of the Stage III Mini H1 Kit.
Putting together the components associated with Stage III FX-R, Mini D2S, and Low beam kits. This kit is also sold as it's own system.
Wiring Install Guides
An overview of the five connections associated with the single xenon relay harness.
An overview of the seven connections associated with the single xenon relay harness.
Checking the connections associated with the simple Standalone Can-Bus harnesses
Accessory Install Guides
A brief explanation of the easy connections associated with these angel eyes and their power supplies.
A brief explanation of the easy connections associated with these LED strips.
A quick overview of the shroud mounting rings and ways they can be applied to various shroud designs.
Clear Lens Swap Guides
How to properly setup the OEM Infiniti FX35/45 projectors with the FX-R clear lens.
How to properly setup the OEM Mazda 3 Projector with the Mazda 3 specific clear lens.
Miscellaneous Supplements
Illustrating the correct order of installation on the hardware included with these projectors.
An helpful guide on identifying the hardware included with these projectors, as many times, not all of it will be used.
Effective mounting techniques for retrofitting these projectors in 9005/9006 reflector based headlights.
Illustrating the correct order of installation on the hardware included with these projectors.
Tips and tricks associated with setting up and maintaining these high quality OEM ballasts
A quick guide on connecting the inputs and outputs on AMP to D2S ballast adapters
A quick guide on connecting the inputs and outputs on D2S to AMP ballast adapters
Other Kits
Reviews the process of retrofitting the Mazda 6 with our Retro-Quik brackets and bi-xenon projectors.
A walkthought on retrofitting the Sportbike Stage III Complete Retrofit Kit with CCFL Angel Eye into a Suzuki SFV 650 Gladius.
Tech Info
Check out our HID Parts Explained, don't miss Tips from the Pros, a Dictionary, Helpful Tools, and more!
HID Parts Explained
Ballasts are necessary to turn on and run the HID gas discharge bulbs.
HID bulbs have a capsule filled with a mixture of noble gasses and metal halide salts.
Shrouds, also known as bezels, make the completed retrofit look better from the outside by shrouding the bare projector and the installation hardware from view.
A true clear lens will help unleash the true potential of the projector compared to the "detuned" stock lenses.
A wire harness is necessary to adapt your factory harness to work with your newly retrofitted HID headlights.
HID Tips from the Pros
HID's can be 3x more efficient, can give you 4x the light output, can be 10x more intense, and can last 6x longer.
Do you have typical "rebased" HID kit and want to upgrade to a true high performance projector retrofit?
Upgrading to an optically clear projector lens will enhance the performance and aesthetics of your low beam or bi-xenon projector's output.
